preg_match negatieve getallen

Overzicht Reageren

Sponsored by: Vacatures door Monsterboard

Laravel Developer

Functie omschrijving Voor een gave organisatie in de buurt van Den Bosch zoek ik een PHP developer. Het is van belang dat je kennis/ervaring hebt met het framework Laravel. Jij gaat in deze functie software applicaties ontwikkelen. Deze software projecten zijn heel divers, en deze organisatie maakt software, van A tot Z. Klanten kunnen in elke sector werkzaam zijn, van profit tot non-profit. Andere taken zijn onder andere: documentatie schrijven over applicaties/uitleg geven over software en applicaties/ klantcontact over bestaande applicaties/applicaties optimaliseren. Bedrijfsprofiel Deze organisatie zit in de regio van Den Bosch en is een klein bedrijf. Er werken circa

Bekijk vacature »

Junior PHP Developer

Je maakt een vliegende start van je carrière, door meteen mee te bouwen aan de digitale aspecten van Coolblue. Wat doe je als Junior PHP Developer bij Coolblue? Als Junior PHP Developer ben je meteen vanaf de start onderdeel van een development team. Je kijkt veel mee met collega’s en volgt trainingen om te groeien als Junior Developer. Op dat moment komt je wil om steeds te blijven leren naar boven. Daarnaast pak je in de sprints ook je eigen stories op om Coolblue iedere dag een beetje beter te kunnen maken. Je sterk analytisch vermogen komt dan ook goed

Bekijk vacature »

Front-end developer - working on software for arou

Functie They have recently started looking for an experienced Front-end (mobile/app) developer. Because of the short lines within the team, they are also looking for someone who can communicate with the service desk, sales and support for technical questions. You will join their IT team consisting of about 10 colleagues divided over two teams in rooms opposite each other. Half of these are involved in their front-end. You will work together with, among others, the Architect, 1 senior, 1 junior and there is a Team Leader. In terms of technology, they work with a unique tech-stack, particularly because of the

Bekijk vacature »

PHP Developer

Functieomschrijving Wij zijn op zoek naar een PHP Developer met Laravel ervaring! Voor een groeiende werkgever in regio Breda zijn wij op zoek naar een medior PHP developer met Laravel ervaring. Je gaat aan de slag met het ontwikkelen van maatwerk software voor klanten in een specifieke markt. Als PHP developer ben je samen met een gemotiveerd team van 6 collega’s verantwoordelijk voor de ontwikkeling, beheer en het innoveren van informatiesystemen voor klanten in een specifieke branche. Als software developer ondersteun je complexe uitdagingen van klanten. Je brengt hun wensen in kaart en vertaalt deze door naar maatwerk software. Om

Bekijk vacature »

.NET developer

Functie As a .NET developer you start in a driven and diverse development team. Your team consists of 16 IT professionals, including 7 software engineers. Because your new employer is internationally active, there are also international IT professionals working in the IT department. As a result, the official language is English. As a team you are responsible for a new Cloud Native product. This product runs entirely in Azure with a Progress Database and various Azure Functions. In addition, this product has a JS front-end, a REST API system and a layer in C # .NET. The idea is therefore

Bekijk vacature »

Developer Full Stack

Functie omschrijving Full Stack Developer gezocht! Wij zijn op zoek naar een Full Stack Developer voor een bedrijf in de regio Nijkerk. Je maakt in deze functie onderdeel uit van een groeiend team met een goede ambitie waarbij eenheid, betrokken en overtreffen de belangrijkste kernwaardes zijn. Het bedrijf werkt volgens de AGILE/SCRUM methode, wat je o.a. terug vindt in de tweewekelijkse sprints, retrospectives en een daily standup. Je takenpakket bestaat uit: Bijdragen aan het door ontwikkelen, onderhouden en optimaliseren van een Saas applicatie; Bijdragen aan de innovatie van het bedrijf en hun klanten; Het ontwikkelen op de laatste technologie van

Bekijk vacature »

Software developer - senior

Functie omschrijving Voor een echt softwarebedrijf in omgeving Gouda zijn wij op zoek naar versterking voor de afdeling Software Development! Ben jij op zoek naar een werkgever waar meerdere software developers werken aan interessante projecten? Ben jij op zoek naar een werkgever waar je onderdeel wordt van een team dat echt passie heeft voor het ontwikkelen van software? Dan ben je hier aan het juiste adres! Als softwareontwikkelaar kom je terecht bij een onafhankelijk, door kwaliteit gedreven, doortastend en daarbij op een Agile wijze werkend bedrijf. Ben jij een expert in het vertalen van Componenten van Functionaliteit naar Business lagen?

Bekijk vacature »

Traineeship ICT regio Amsterdam/Utrecht

Wat ga je doen? Het traineeship begint met een fulltime maand cursussen en praktijkdagen, waarin je de basis van het IT-vak leert op de Shared Servicedesk (SSD). Daarnaast ga je meteen aan de slag voor je eerste certificering! (ITILv4). Je start in een groep met 4 tot 10 deelnemers, waarmee jij gedurende die maand optrekt en je kennis kunt delen. Na het voltooien van de eerste maand ga je direct voor een langere periode aan de slag bij één van onze klanten of blijf je intern bij ons op de Shared Servicedesk. Je bent het eerste aanspreekpunt van de eindgebruikers

Bekijk vacature »

Oracle APEX developer

Wat je gaat doen: Als Oracle APEX ontwikkelaar bij DPA werk je samen met collega’s aan de meest interessante opdrachten. Je zult je ervaring met SQL, PL/SQL, JavaScript, HTML en CSS inzetten om wensen van opdrachtgevers te vertalen naar technische oplossingen. Je werk is heel afwisselend, omdat DPA zich niet beperkt tot een specifieke branche. Zo ben je de ene keer bezig binnen de zorgsector, de andere keer is dit bij de overheid. Wat we vragen: Klinkt goed? Voor deze functie breng je het volgende mee: Je hebt een hbo- of universitaire opleiding afgerond Je hebt 2 tot 5 jaar

Bekijk vacature »

Ontwikkelaar MS Dynamics 365 Projecten

Samengevat: Deze werkgever is de kwaliteitsdienst in de tuinbouwsector. Ben jij een ervaren ontwikkelaar? Heb jij ervaring met Ms Dynamics 365 BC? Vaste baan: Ontwikkelaar Ms Dynamics 365 BC ICT MBO 3.500 - 5.000 Ontwikkelaar Ms Dynamics 365 BC Ons bedrijf bewaakt en bevordert de kwaliteit van producten, processen en ketens in de tuinbouw. Wij kenmerken zich door openheid, ruimte voor initiatief, collegialiteit en zelfontplooiing. Deze werkgever is een veelzijdige organisatie. Je werkt voor de eigen IT organisatie. Zij werken met moderne technologie en staan open voor innovatie. Functie: Voor de vacature als Ontwikkelaar Ms Dynamics 365 BC Roelofarendsveen MBO

Bekijk vacature »

Front-end Developer

Onze klant is sinds 2 jaar actief als adviseur en bemiddelaar in de verzekeringsmarkt. Sindsdien proberen zij deze slapende markt flink wakker te schudden. Dit willen zij doen door het bouwen van slimme vergelijkers op hun eigen website en die van partners. Het bedrijf wil continu voorop lopen, zodat consumenten eenvoudig de verzekeringen kunnen vinden die het beste bij ze past. Functieomschrijving Als Front-end Developer werk je aan vergelijkingsmodules die consumenten dagelijks gebruiken bij het vergelijken en afsluiten van verzekeringen. Je vindt het leuk om samen te werken met de product owner, bestaande modules te verbeteren en nieuwe vergelijkers "from

Bekijk vacature »

Junior Back end developer PHP, Symfony

Functie Wij hebben onlangs onze eerste collega’s aangenomen, waardoor ons development team momenteel uit 4 personen bestaat. We bouwen onze software op basis van een PHP-framework (wat op zichzelf een Symfony framework is). Qua ontwikkeling focussen wij ons op 3 focus velden; – API-ontwikkeling/ Component Creatie – Implementatie – Framework ontwikkeling; het toevoegen van nieuwe functionaliteit of interne microservices Onze senior software engineer focust zich momenteel op de laatste twee punten, maar wij komen handen te kort op het eerste veld. Daarom zijn wij op zoek naar een enthousiaste junior software engineer die graag de kneepjes van het vak wil

Bekijk vacature »

T-SQL Database developer

Functie omschrijving Ben jij een ETL database specialist? Houd jij ervan om te puzzelen met Databases, Query's & Stored procedures? Zoek jij uitdaging, vrijheid en verantwoordelijkheid? Zoek dan niet verder! Wij zijn per direct op zoek naar medior en senior database developers. Je gaat werken voor een relatief klein softwarebedrijf in omgeving Tilburg. Samen met 12 collega's (allemaal techneuten), ga jij je bezig houden met het bouwen en/of onderhouden van database software. Deze software wordt internationaal ingezet voor het automatiseren van logistieke processen. Jouw werkzaamheden gaan er als volgt uit zien: Je bent in een klein team met developers, verantwoordelijk

Bekijk vacature »

SAP HANA Developer

Vacature details Vakgebied: Software/IT Opleiding: Senior Werklocatie: Veldhoven Vacature ID: 13382 Introductie We is looking for a HANA Developer to work for our client. The candidate has to have an experience in building Data Intensive Applications (DIA’s). The role of a HANA Developer at ASML involves working on building Data Intensive Applications in an industrial/enterprise environment. The primary responsibility is to handle data from various sources and determine the best way to structure it for use by data analysts, who will run queries and algorithms against it for predictive and prescriptive analytics through machine learning. Wat verwachten we van jou?

Bekijk vacature »

Senior Mobile Developer

Sogeti is een organisatie met een goede werksfeer en zo min mogelijk hiërarchische verhoudingen. Ga je bij ons als Senior Mobile Developer aan de slag? Dan werk je dagelijks met collega’s aan de mooiste IT-projecten. Deze snelgroeiende groep collega’s krijgt energie van hun vak en dat merk je op de werkvloer. Onze klantenkring is groot en divers, dat vraagt om flexibiliteit van jou. Tegelijkertijd betekent dit dagelijks nieuwe dingen leren én dat geen werkdag hetzelfde is. Natuurlijk krijg jij de mogelijkheid je te certificeren. We organiseren regelmatig technische Meet-ups en doen we veel aan kennisdeling waarbij iedereen welkom is, zowel

Bekijk vacature »
Arnold Dijkman

Arnold Dijkman

28/02/2019 11:45:42
Quote Anchor link
Hallo,

Ik zit met het volgende probleem:

Al jaren maak ik gebruik van een open source urenregistratiesysteem. Het werk vlekkeloos.
Nu komt de wens om negatieve uren te kunnen schrijven, en standaard ondersteunt de software dit niet (alleen positieve uren zijn toegestaan).
Graag zou ik dat met een aanpassing in de code willen realiseren.

Hieronder de code:

Code (php)
PHP script in nieuw venster Selecteer het PHP script
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
<?php


import('DateAndTime');

// The ttTimeHelper is a class to help with time-related values.
class ttTimeHelper {

  // isWeekend determines if $date falls on weekend.
  static function isWeekend($date) {
    $weekDay = date('w', strtotime($date));
    return ($weekDay == WEEKEND_START_DAY || $weekDay == (WEEKEND_START_DAY + 1) % 7);
  }


  // isHoliday determines if $date falls on a holiday.
  static function isHoliday($date) {
    global $user;
    global $i18n;

    if (!$user->show_holidays) return false;

    // $date is expected as string in DB_DATEFORMAT.
    $month = date('m', strtotime($date));
    $day = date('d', strtotime($date));
    if (in_array($month.'/'.$day, $i18n->holidays))
      return true;

    return false;
  }


  // isValidTime validates a value as a time string.
  static function isValidTime($value) {
    if (strlen($value)==0 || !isset($value)) return false;

    // 24 hour patterns.
    if ($value == '24:00' || $value == '2400') return true;

    if (preg_match('/^([0-1]{0,1}[0-9]|[2][0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
    }

    if (preg_match('/^([0-1]{0,1}[0-9]|[2][0-4])$/', $value )) { // 0 - 24
      return true;
    }


    // 12 hour patterns
    if (preg_match('/^[1-9]\s?(am|AM|pm|PM)$/', $value)) { // 1 - 9 am
      return true;
    }

    if (preg_match('/^(0[1-9]|1[0-2])\s?(am|AM|pm|PM)$/', $value)) { // 01 - 12 am
      return true;
    }

    if (preg_match('/^[1-9]:?[0-5][0-9]\s?(am|AM|pm|PM)$/', $value)) { // 1:00 - 9:59 am, 100 - 959 am
      return true;
    }

    if (preg_match('/^(0[1-9]|1[0-2]):?[0-5][0-9]\s?(am|AM|pm|PM)$/', $value)) { // 01:00 - 12:59 am, 0100 - 1259 am
      return true;
    }


    return false;
  }


  // isValidDuration validates a value as a time duration string (in hours and minutes).
  static function isValidDuration($value) {
    if (strlen($value) == 0 || !isset($value)) return false;

    if ($value == '24:00' || $value == '2400') return true;

    if (preg_match('/^([0-1]{0,1}[0-9]|2[0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
    }

    if (preg_match('/^([0-1]{0,1}[0-9]|2[0-4])h?$/', $value )) { // 0, 1 ... 24
      return true;
    }


    global $user;
    $localizedPattern = '/^([0-1]{0,1}[0-9]|2[0-3])?['.$user->decimal_mark.'][0-9]{1,4}h?$/';
    if (preg_match($localizedPattern, $value )) { // decimal values like 0.5, 1.25h, ... .. 23.9999h (or with comma)
      return true;
    }


    return false;
  }


  // postedDurationToMinutes - converts a value representing a duration
  // (usually enetered in a form by a user) to an integer number of minutes.
  //
  // Parameters:
  //   $duration - user entered duration string. Valid strings are:
  //               3 or 3h - means 3 hours. Note: h and m letters are not localized.
  //               0.25 or 0.25h or .25 or .25h - means a quarter of hour.
  //               0,25 or 0,25h or ,25 or ,25h - same as above for users with comma ad decimal mark.
  //               1:30 - means 1 hour 30 minutes.
  //               25m - means 25 minutes.
  //   $max - maximum number of minutes that is valid.
  //
  //   At the moment, we have 2 variations of duration types:
  //   1) A duration within a day, such as in a time entry.
  //   These are less or equal to 24*60 minutes.
  //
  //   2) A duration of a monthly quota, with max value of 31*24*60 minutes.
  //
  // This function is generic to be used for both types.
  //
  // Returns false if the value cannot be converted.

  static function postedDurationToMinutes($duration, $max = 1440) {
    // Handle empty value.
    if (!isset($duration) || strlen($duration) == 0)
      return null; // Value is not set. Caller decides whether it is valid or not.

    // Handle whole hours.

    if (preg_match('/^\d{1,3}h?$/', $duration )) { // 0 - 999, 0h - 999h
      $minutes = 60 * trim($duration, 'h');
      return $minutes > $max ? false : $minutes;
    }


    // Handle a normalized duration value.
    if (preg_match('/^\d{1,3}:[0-5][0-9]$/', $duration )) { // 0:00 - 999:59
      $time_array = explode(':', $duration);
      $minutes = (int)@$time_array[1] + ((int)@$time_array[0]) * 60;
      return $minutes > $max ? false : $minutes;
    }


    // Handle localized fractional hours.
    global $user;
    $localizedPattern = '/^(\d{1,3})?['.$user->getDecimalMark().'][0-9]{1,4}h?$/';
    if (preg_match($localizedPattern, $duration )) { // decimal values like .5, 1.25h, ... .. 999.9999h (or with comma)
        if ($user->getDecimalMark() == ',')
          $duration = str_replace (',', '.', $duration);

        $minutes = (int)round(60 * floatval($duration));
        return $minutes > $max ? false : $minutes;
    }


    // Handle minutes. Some users enter durations like 10m (meaning 10 minutes).
    if (preg_match('/^\d{1,5}m$/', $duration )) { // 0m - 99999m
      $minutes = (int) trim($duration, 'm');
      return $minutes > $max ? false : $minutes;
    }


    // Everything else is not a valid duration.
    return false;
  }


  // minutesToDuration converts an integer number of minutes into duration string.
  // Formats returned HH:MM, HHH:MM, HH, or HHH.

  static function minutesToDuration($minutes, $abbreviate = false) {
    if ($minutes < 0) return false;

    $hours = (string) (int)($minutes / 60);
    $mins = (string) round(fmod($minutes, 60));
    if (strlen($mins) == 1)
      $mins = '0' . $mins;
    if ($abbreviate && $mins == '00')
      return $hours;

    return $hours.':'.$mins;
  }


  // toMinutes - converts a time string in format 00:00 to a number of minutes.
  static function toMinutes($value) {
    $time_a = explode(':', $value);
    return (int)@$time_a[1] + ((int)@$time_a[0]) * 60;
  }


  // toAbsDuration - converts a number of minutes to format 0:00
  // even if $minutes is negative.

  static function toAbsDuration($minutes, $abbreviate = false){
    $hours = (string)((int)abs($minutes / 60));
    $mins = (string) round(abs(fmod($minutes, 60)));
    if (strlen($mins) == 1)
      $mins = '0' . $mins;
    if ($abbreviate && $mins == '00')
      return $hours;

    return $hours.':'.$mins;
  }


  // toDuration - calculates duration between start and finish times in 00:00 format.
  static function toDuration($start, $finish) {
    $duration_minutes = ttTimeHelper::toMinutes($finish) - ttTimeHelper::toMinutes($start);
    if ($duration_minutes <= 0) return false;

    return ttTimeHelper::toAbsDuration($duration_minutes);
  }


  // The to12HourFormat function converts a 24-hour time value (such as 15:23) to 12 hour format (03:23 PM).
  static function to12HourFormat($value) {
    if ('24:00' == $value) return '12:00 AM';

    $time_a = explode(':', $value);
    if ($time_a[0] > 12)
      $res = (string)((int)$time_a[0] - 12).':'.$time_a[1].' PM';
    elseif ($time_a[0] == 12)
      $res = $value.' PM';
    elseif ($time_a[0] == 0)
      $res = '12:'.$time_a[1].' AM';
    else
      $res = $value.' AM';
    return $res;
  }


  // The to24HourFormat function attempts to convert a string value (human readable notation of time of day)
  // to a 24-hour time format HH:MM.

  static function to24HourFormat($value) {
    $res = null;

    // Algorithm: use regular expressions to find a matching pattern, starting with most popular patterns first.
    $tmp_val = trim($value);

    // 24 hour patterns.
    if (preg_match('/^([01][0-9]|2[0-3]):[0-5][0-9]$/', $tmp_val)) { // 00:00 - 23:59
      // We already have a 24-hour format. Just return it.

      $res = $tmp_val;
      return $res;
    }

    if (preg_match('/^[0-9]:[0-5][0-9]$/', $tmp_val)) { // 0:00 - 9:59
      // This is a 24-hour format without a leading zero. Add 0 and return.

      $res = '0'.$tmp_val;
      return $res;
    }

    if (preg_match('/^[0-9]$/', $tmp_val)) { // 0 - 9
      // Single digit. Assuming hour number.

      $res = '0'.$tmp_val.':00';
      return $res;
    }

    if (preg_match('/^([01][0-9]|2[0-4])$/', $tmp_val)) { // 00 - 24
      // Two digit hour number.

      $res = $tmp_val.':00';
      return $res;
    }

    if (preg_match('/^[0-9][0-5][0-9]$/', $tmp_val)) { // 000 - 959
      // Missing colon. We'll assume the first digit is the hour, the rest is minutes.

      $tmp_arr = str_split($tmp_val);
      $res = '0'.$tmp_arr[0].':'.$tmp_arr[1].$tmp_arr[2];
      return $res;
    }

    if (preg_match('/^([01][0-9]|2[0-3])[0-5][0-9]$/', $tmp_val)) { // 0000 - 2359
      // Missing colon. We'll assume the first 2 digits are the hour, the rest is minutes.

      $tmp_arr = str_split($tmp_val);
      $res = $tmp_arr[0].$tmp_arr[1].':'.$tmp_arr[2].$tmp_arr[3];
      return $res;
    }

    // Special handling for midnight.
    if ($tmp_val == '24:00' || $tmp_val == '2400')
      return '24:00';

    // 12 hour AM patterns.
    if (preg_match('/.(am|AM)$/', $tmp_val)) {

      // The $value ends in am or AM. Strip it.
      $tmp_val = rtrim(substr($tmp_val, 0, -2));

      // Special case to handle 12, 12:MM, and 12MM AM.
      if (preg_match('/^12:?([0-5][0-9])?$/', $tmp_val))
        $tmp_val = '00'.substr($tmp_val, 2);

      // We are ready to convert AM time.
      if (preg_match('/^(0[0-9]|1[0-1]):[0-5][0-9]$/', $tmp_val)) { // 00:00 - 11:59
        // We already have a 24-hour format. Just return it.

        $res = $tmp_val;
        return $res;
      }

      if (preg_match('/^[1-9]:[0-5][0-9]$/', $tmp_val)) { // 1:00 - 9:59
        // This is a 24-hour format without a leading zero. Add 0 and return.

        $res = '0'.$tmp_val;
        return $res;
      }

      if (preg_match('/^[1-9]$/', $tmp_val)) { // 1 - 9
        // Single digit. Assuming hour number.

        $res = '0'.$tmp_val.':00';
        return $res;
      }

      if (preg_match('/^(0[0-9]|1[0-1])$/', $tmp_val)) { // 00 - 11
        // Two digit hour number.

        $res = $tmp_val.':00';
        return $res;
      }

      if (preg_match('/^[1-9][0-5][0-9]$/', $tmp_val)) { // 100 - 959
        // Missing colon. Assume the first digit is the hour, the rest is minutes.

        $tmp_arr = str_split($tmp_val);
        $res = '0'.$tmp_arr[0].':'.$tmp_arr[1].$tmp_arr[2];
        return $res;
      }

      if (preg_match('/^(0[0-9]|1[0-1])[0-5][0-9]$/', $tmp_val)) { // 0000 - 1159
        // Missing colon. We'll assume the first 2 digits are the hour, the rest is minutes.

        $tmp_arr = str_split($tmp_val);
        $res = $tmp_arr[0].$tmp_arr[1].':'.$tmp_arr[2].$tmp_arr[3];
        return $res;
      }
    }
// AM cases handling.

    // 12 hour PM patterns.

    if (preg_match('/.(pm|PM)$/', $tmp_val)) {

      // The $value ends in pm or PM. Strip it.
      $tmp_val = rtrim(substr($tmp_val, 0, -2));

      if (preg_match('/^[1-9]$/', $tmp_val)) { // 1 - 9
        // Single digit. Assuming hour number.

        $hour = (string)(12 + (int)$tmp_val);
        $res = $hour.':00';
        return $res;
      }

      if (preg_match('/^((0[1-9])|(1[0-2]))$/', $tmp_val)) { // 01 - 12
        // Double digit hour.

        if ('12' != $tmp_val)
          $tmp_val = (string)(12 + (int)$tmp_val);
        $res = $tmp_val.':00';
        return $res;
      }

      if (preg_match('/^[1-9][0-5][0-9]$/', $tmp_val)) { // 100 - 959
        // Missing colon. We'll assume the first digit is the hour, the rest is minutes.

        $tmp_arr = str_split($tmp_val);
        $hour = (string)(12 + (int)$tmp_arr[0]);
        $res = $hour.':'.$tmp_arr[1].$tmp_arr[2];
        return $res;
      }

      if (preg_match('/^(0[1-9]|1[0-2])[0-5][0-9]$/', $tmp_val)) { // 0100 - 1259
        // Missing colon. We'll assume the first 2 digits are the hour, the rest is minutes.

        $hour = substr($tmp_val, 0, -2);
        $min = substr($tmp_val, 2);
        if ('12' != $hour)
          $hour = (string)(12 + (int)$hour);
        $res = $hour.':'.$min;
        return $res;
      }

      if (preg_match('/^[1-9]:[0-5][0-9]$/', $tmp_val)) { // 1:00 - 9:59
        $hour = substr($tmp_val, 0, -3);
        $min = substr($tmp_val, 2);
        $hour = (string)(12 + (int)$hour);
        $res = $hour.':'.$min;
        return $res;
      }

      if (preg_match('/^(0[1-9]|1[0-2]):[0-5][0-9]$/', $tmp_val)) { // 01:00 - 12:59
        $hour = substr($tmp_val, 0, -3);
        $min = substr($tmp_val, 3);
        if ('12' != $hour)
          $hour = (string)(12 + (int)$hour);
        $res = $hour.':'.$min;
        return $res;
      }
    }
// PM cases handling.

    return $res;
  }


  // isValidInterval - checks if finish time is greater than start time.
  static function isValidInterval($start, $finish) {
    $start = ttTimeHelper::to24HourFormat($start);
    $finish = ttTimeHelper::to24HourFormat($finish);
    if ('00:00' == $finish) $finish = '24:00';

    $minutesStart = ttTimeHelper::toMinutes($start);
    $minutesFinish = ttTimeHelper::toMinutes($finish);
    if ($minutesFinish > $minutesStart)
      return true;

    return false;
  }


  // insert - inserts a time record into tt_log table. Does not deal with custom fields.
  static function insert($fields)
  {

    global $user;
    $mdb2 = getConnection();

    $user_id = (int) $fields['user_id'];
    $group_id = (int) $fields['group_id'];
    $org_id = (int) $fields['org_id'];
    $date = $fields['date'];
    $start = $fields['start'];
    $finish = $fields['finish'];
    $duration = $fields['duration'];
    if ($duration) {
      $minutes = ttTimeHelper::postedDurationToMinutes($duration);
      $duration = ttTimeHelper::minutesToDuration($minutes);
    }

    $client = $fields['client'];
    $project = $fields['project'];
    $task = $fields['task'];
    $invoice = $fields['invoice'];
    $note = $fields['note'];
    $billable = $fields['billable'];
    $paid = $fields['paid'];
    if (array_key_exists('status', $fields)) { // Key exists and may be NULL during migration of data.
      $status_f = ', status';
      $status_v = ', '.$mdb2->quote($fields['status']);
    }


    $start = ttTimeHelper::to24HourFormat($start);
    if ($finish) {
      $finish = ttTimeHelper::to24HourFormat($finish);
      if ('00:00' == $finish) $finish = '24:00';
    }


    $created_v = ', now(), '.$mdb2->quote($_SERVER['REMOTE_ADDR']).', '.$user->id;

    if (!$billable) $billable = 0;
    if (!$paid) $paid = 0;

    if ($duration) {
      $sql = "insert into tt_log (user_id, group_id, org_id, date, duration, client_id, project_id, task_id, invoice_id, comment, billable, paid, created, created_ip, created_by $status_f) ".
        "values ($user_id, $group_id, $org_id, ".$mdb2->quote($date).", '$duration', ".$mdb2->quote($client).", ".$mdb2->quote($project).", ".$mdb2->quote($task).", ".$mdb2->quote($invoice).", ".$mdb2->quote($note).", $billable, $paid $created_v $status_v)";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }
else {
      $duration = ttTimeHelper::toDuration($start, $finish);
      if ($duration === false) $duration = 0;
      if (!$duration && ttTimeHelper::getUncompleted($user_id)) return false;

      $sql = "insert into tt_log (user_id, group_id, org_id, date, start, duration, client_id, project_id, task_id, invoice_id, comment, billable, paid, created, created_ip, created_by $status_f) ".
        "values ($user_id, $group_id, $org_id, ".$mdb2->quote($date).", '$start', '$duration', ".$mdb2->quote($client).", ".$mdb2->quote($project).", ".$mdb2->quote($task).", ".$mdb2->quote($invoice).", ".$mdb2->quote($note).", $billable, $paid $created_v $status_v)";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }


    $id = $mdb2->lastInsertID('tt_log', 'id');
    return $id;
  }


  // update - updates a record in log table. Does not update its custom fields.
  static function update($fields)
  {

    global $user;
    $mdb2 = getConnection();

    $id = $fields['id'];
    $date = $fields['date'];
    $user_id = $fields['user_id'];
    $client = $fields['client'];
    $project = $fields['project'];
    $task = $fields['task'];
    $start = $fields['start'];
    $finish = $fields['finish'];
    $duration = $fields['duration'];
    if ($duration) {
      $minutes = ttTimeHelper::postedDurationToMinutes($duration);
      $duration = ttTimeHelper::minutesToDuration($minutes);
    }

    $note = $fields['note'];

    $billable_part = '';
    if ($user->isPluginEnabled('iv')) {
      $billable_part = $fields['billable'] ? ', billable = 1' : ', billable = 0';
    }

    $paid_part = '';
    if ($user->can('manage_invoices') && $user->isPluginEnabled('ps')) {
      $paid_part = $fields['paid'] ? ', paid = 1' : ', paid = 0';
    }

    $modified_part = ', modified = now(), modified_ip = '.$mdb2->quote($_SERVER['REMOTE_ADDR']).', modified_by = '.$user->id;

    $start = ttTimeHelper::to24HourFormat($start);
    $finish = ttTimeHelper::to24HourFormat($finish);
    if ('00:00' == $finish) $finish = '24:00';
    
    if ($start) $duration = '';

    if ($duration) {
      $sql = "UPDATE tt_log set start = NULL, duration = '$duration', client_id = ".$mdb2->quote($client).", project_id = ".$mdb2->quote($project).", task_id = ".$mdb2->quote($task).", ".
        "comment = ".$mdb2->quote($note)."$billable_part $paid_part $modified_part, date = '$date' WHERE id = $id";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }
else {
      $duration = ttTimeHelper::toDuration($start, $finish);
      if ($duration === false)
        $duration = 0;
      $uncompleted = ttTimeHelper::getUncompleted($user_id);
      if (!$duration && $uncompleted && ($uncompleted['id'] != $id))
        return false;

      $sql = "UPDATE tt_log SET start = '$start', duration = '$duration', client_id = ".$mdb2->quote($client).", project_id = ".$mdb2->quote($project).", task_id = ".$mdb2->quote($task).", ".
        "comment = ".$mdb2->quote($note)."$billable_part $paid_part $modified_part, date = '$date' WHERE id = $id";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }

    return true;
  }


  // delete - deletes a record from tt_log table and its associated custom field values.
  static function delete($id) {
    global $user;
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $sql = "update tt_log set status = null".
      " where id = $id and user_id = $user_id and group_id = $group_id and org_id = $org_id";
    $affected = $mdb2->exec($sql);
    if (is_a($affected, 'PEAR_Error'))
      return false;

    $sql = "update tt_custom_field_log set status = null".
      " where log_id = $id and group_id = $group_id and org_id = $org_id";
    $affected = $mdb2->exec($sql);
    if (is_a($affected, 'PEAR_Error'))
      return false;

    return true;
  }


  // getTimeForDay - gets total time for a user for a specific date.
  static function getTimeForDay($date) {
    global $user;
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $sql = "select sum(time_to_sec(duration)) as sm from tt_log".
      " where user_id = $user_id and group_id = $group_id and org_id = $org_id and date = '$date' and status = 1";
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      $val = $res->fetchRow();
      return sec_to_time_fmt_hm($val['sm']);
    }

    return false;
  }


  // getTimeForWeek - gets total time for a user for a given week.
  static function getTimeForWeek($date) {
    global $user;
    import('Period');
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $period = new Period(INTERVAL_THIS_WEEK, $date);
    $sql = "select sum(time_to_sec(duration)) as sm from tt_log".
      " where user_id = $user_id and group_id = $group_id and org_id = $org_id".
      " and date >= '".$period->getStartDate(DB_DATEFORMAT)."' and date <= '".$period->getEndDate(DB_DATEFORMAT)."' and status = 1";
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      $val = $res->fetchRow();
      return sec_to_time_fmt_hm($val['sm']);
    }

    return false;
  }


  // getTimeForMonth - gets total time for a user for a given month.
  static function getTimeForMonth($date) {
    global $user;
    import('Period');
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $period = new Period(INTERVAL_THIS_MONTH, $date);
    $sql = "select sum(time_to_sec(duration)) as sm from tt_log".
      " where user_id = $user_id and group_id = $group_id and org_id = $org_id".
      " and date >= '".$period->getStartDate(DB_DATEFORMAT)."' and date <= '".$period->getEndDate(DB_DATEFORMAT)."' and status = 1";
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      $val = $res->fetchRow();
      return sec_to_time_fmt_hm($val['sm']);
    }

    return false;
  }


  // getUncompleted - retrieves an uncompleted record for user, if one exists.
  static function getUncompleted($user_id) {
    $mdb2 = getConnection();

    $sql = "select id, start from tt_log  
      where user_id = $user_id and start is not null and time_to_sec(duration) = 0 and status = 1"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      if (!$res->numRows()) {
        return false;
      }

      if ($val = $res->fetchRow()) {
        return $val;
      }
    }

    return false;
  }


  // overlaps - determines if a record overlaps with an already existing record.
  //
  // Parameters:
  //   $user_id - user id for whom to determine overlap
  //   $date - date
  //   $start - new record start time
  //   $finish - new record finish time, may be null
  //   $record_id - optional record id we may be editing, excluded from overlap set

  static function overlaps($user_id, $date, $start, $finish, $record_id = null) {
    // Do not bother checking if we allow overlaps.
    global $user;
    if ($user->allow_overlap) return false;

    $mdb2 = getConnection();

    $start = ttTimeHelper::to24HourFormat($start);
    if ($finish) {
      $finish = ttTimeHelper::to24HourFormat($finish);
      if ('00:00' == $finish) $finish = '24:00';
    }

    // Handle these 3 overlap situations:
    // - start time in existing record
    // - end time in existing record
    // - record fully encloses existing record

    $sql = "select id from tt_log  
      where user_id = $user_id and date = "
.$mdb2->quote($date)."
      and start is not null and duration is not null and status = 1 and (
      (cast("
.$mdb2->quote($start)." as time) >= start and cast(".$mdb2->quote($start)." as time) < addtime(start, duration))";
    if ($finish) {
      $sql .= " or (cast(".$mdb2->quote($finish)." as time) <= addtime(start, duration) and cast(".$mdb2->quote($finish)." as time) > start)
      or (cast("
.$mdb2->quote($start)." as time) < start and cast(".$mdb2->quote($finish)." as time) > addtime(start, duration))";
    }

    $sql .= ")";
    if ($record_id) {
      $sql .= " and id <> $record_id";
    }

    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      if (!$res->numRows()) {
        return false;
      }

      if ($val = $res->fetchRow()) {
        return $val;
      }
    }

    return false;
  }


  // getRecord - retrieves a time record identified by its id.
  static function getRecord($id, $user_id) {
    global $user;
    $sql_time_format = "'%k:%i'"; //  24 hour format.
    if ('%I:%M %p' == $user->time_format)
      $sql_time_format = "'%h:%i %p'"; // 12 hour format for MySQL TIME_FORMAT function.

    $mdb2 = getConnection();

    $sql = "select l.id as id, TIME_FORMAT(l.start, $sql_time_format) as start,
      TIME_FORMAT(sec_to_time(time_to_sec(l.start) + time_to_sec(l.duration)), $sql_time_format) as finish,
      TIME_FORMAT(l.duration, '%k:%i') as duration,
      p.name as project_name, t.name as task_name, l.comment, l.client_id, l.project_id, l.task_id, l.invoice_id, l.billable, l.paid, l.date
      from tt_log l
      left join tt_projects p on (p.id = l.project_id)
      left join tt_tasks t on (t.id = l.task_id)
      where l.id = $id and l.user_id = $user_id and l.status = 1"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      if (!$res->numRows()) {
        return false;
      }

      if ($val = $res->fetchRow()) {
        return $val;
      }
    }

    return false;
  }


  // getAllRecords - returns all time records for a certain user.
  static function getAllRecords($user_id) {
    $result = array();

    $mdb2 = getConnection();

    $sql = "select l.id, l.user_id, l.date, TIME_FORMAT(l.start, '%k:%i') as start,
      TIME_FORMAT(sec_to_time(time_to_sec(l.start) + time_to_sec(l.duration)), '%k:%i') as finish,
      TIME_FORMAT(l.duration, '%k:%i') as duration,
      l.client_id, l.project_id, l.task_id, l.invoice_id, l.comment, l.billable, l.paid, l.status
      from tt_log l where l.user_id = $user_id order by l.id"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      while ($val = $res->fetchRow()) {
        $result[] = $val;
      }
    }
else return false;

    return $result;
  }


  // getRecords - returns time records for a user for a given date.
  static function getRecords($user_id, $date) {
    global $user;
    $mdb2 = getConnection();

    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $sql_time_format = "'%k:%i'"; //  24 hour format.
    if ('%I:%M %p' == $user->getTimeFormat())
      $sql_time_format = "'%h:%i %p'"; // 12 hour format for MySQL TIME_FORMAT function.

    $client_field = null;
    if ($user->isPluginEnabled('cl'))
      $client_field = ", c.name as client";

    $left_joins = " left join tt_projects p on (l.project_id = p.id)".
      " left join tt_tasks t on (l.task_id = t.id)";
    if ($user->isPluginEnabled('cl'))
      $left_joins .= " left join tt_clients c on (l.client_id = c.id)";

    $result = array();
    $sql = "select l.id as id, TIME_FORMAT(l.start, $sql_time_format) as start,
      TIME_FORMAT(sec_to_time(time_to_sec(l.start) + time_to_sec(l.duration)), $sql_time_format) as finish,
      TIME_FORMAT(l.duration, '%k:%i') as duration, p.name as project, t.name as task, l.comment, l.billable, l.invoice_id $client_field
      from tt_log l
      $left_joins
      where l.date = '$date' and l.user_id = $user_id and l.group_id = $group_id and l.org_id = $org_id and l.status = 1
      order by l.start, l.id"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      while ($val = $res->fetchRow()) {
        if($val['duration']=='0:00')
          $val['finish'] = '';
        $result[] = $val;
      }
    }
else return false;

    return $result;
  }


  // canAdd determines if we can add a record in case there is a limit.
  static function canAdd() {
    $mdb2 = getConnection();
    $sql = "select param_value from tt_site_config where param_name = 'exp_date'";
    $res = $mdb2->query($sql);
    $val = $res->fetchRow();
    if (!$val) return true; // No expiration date.

    if (strtotime($val['param_value']) > time())
      return true; // Expiration date exists but not reached.

    return false;
  }
}


?>


Zou iemand mij hiermee kunnen helpen?
 
PHP hulp

PHP hulp

29/09/2023 09:03:44
 
Adoptive Solution

Adoptive Solution

28/02/2019 12:57:15
Quote Anchor link
Voor de nieuwsgierigen onder ons, hier is de bron :

https://github.com/anuko/timetracker

Toevoeging op 28/02/2019 13:05:21:

Ik zie dat de vraag ook in het Anuko forum is gesteld :

https://www.anuko.com/forum/viewtopic.php?t=2009
 
Nick Vledder

Nick Vledder

28/02/2019 13:31:57
Quote Anchor link
PHP-Developer inhuren een optie?
 
Arnold Dijkman

Arnold Dijkman

28/02/2019 13:42:33
Quote Anchor link
Adoptive Solution op 28/02/2019 12:57:15:
Voor de nieuwsgierigen onder ons, hier is de bron :

https://github.com/anuko/timetracker

Toevoeging op 28/02/2019 13:05:21:

Ik zie dat de vraag ook in het Anuko forum is gesteld :

https://www.anuko.com/forum/viewtopic.php?t=2009


Klopt hoor, dat ben ik :)

En ik hoop dat iemand mij hier kan helpen ipv een PHP developer in te huren, wel zo leuk en leerzaam!
 
Adoptive Solution

Adoptive Solution

28/02/2019 14:15:49
Quote Anchor link
Edit:
Verwijzing naar persoonlijke gegevens en werkgever verwijderd.
Niet relevant voor dit topic.
Gewijzigd op 28/02/2019 15:52:32 door - Ariën -
 
Rob Doemaarwat

Rob Doemaarwat

28/02/2019 14:50:54
Quote Anchor link
-?
 
Arnold Dijkman

Arnold Dijkman

28/02/2019 14:54:00
Quote Anchor link
Rob Doemaarwat op 28/02/2019 14:50:54:
-?


Heb ik geprobeerd Rob, werkt niet.
Dit heb ik gedaan:
Code (php)
PHP script in nieuw venster Selecteer het PHP script
1
2
3
4
<?php
    if (preg_match('/^([0-1]{0,1}[0-9]|[2][0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
?>

gewijzigd in
Code (php)
PHP script in nieuw venster Selecteer het PHP script
1
2
3
4
<?php
    if (preg_match('/^-?([0-1]{0,1}[0-9]|[2][0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
?>
 
Rob Doemaarwat

Rob Doemaarwat

28/02/2019 15:04:05
Quote Anchor link
Nou ja, dat an sich werkt wel ($value mag dan bijvoorbeeld "-8:00" zijn), maar blijkbaar gaat het dan ergens anders mis in die 740 regels code (een PHP of MySQL functie die niet met negatieve tijden overweg kan, misschien zijn de velden in je database unsigned, enz). En dan is het nog niet beperkt tot die 740 regels van hierboven, als ik zo in die GitHub repo kijk, dan is er nog wel "iets meer". Je zult eerst zelf je probleem moeten proberen in te perken zodat je de vraag iets beter kunt stellen dan enkel "doet het niet".
 
Thomas van den Heuvel

Thomas van den Heuvel

28/02/2019 16:27:03
Quote Anchor link
Inderdaad, je kunt wel ergens een regexp rechtbreien maar dat wil helemaal niet zeggen dat dan ineens negatieve urenregistratie werkt... Je weet simpelweg de impact van zo'n wijziging niet tenzij je door alle bijbehorende relevante code gaat.

Heb je al gekeken of er een workaround is (bijvoorbeeld uren onder een speciale post boeken) of er een fork met deze uitbreiding?

Wellicht ook handig is de realisatie dat jij waarschijnlijk niet de enige bent die dit issue heeft, oftewel, dit probleem is waarschijnlijk niet uniek.
 
Nick Vledder

Nick Vledder

01/03/2019 11:22:43
Quote Anchor link
Zelf even de moeite nemen het "probleem" achter de vraag te isoleren, zou prettig zijn. "Het werkt niet" en vervolgens flink wat regels op een forum dumpen is niet zo chique.

PS Wat bedoel je trouwens met de opmerking "wel zo leuk en leerzaam!". Leuk voor jou en leerzaam voor iemand anders? Dus je gunt iemand anders wel een leercurve terwijl je zelf toekijkt? Wat vriendelijk van je.
Gewijzigd op 01/03/2019 11:33:48 door Nick Vledder
 
Ozzie PHP

Ozzie PHP

01/03/2019 14:30:32
Quote Anchor link
@Nick

>> Leuk voor jou en leerzaam voor iemand anders?

Dat zegt ie niet hoor.
 
Nick Vledder

Nick Vledder

02/03/2019 19:19:03
Quote Anchor link
Nee, maar hij spreekt het ook niet tegen.
 



Overzicht Reageren

 
 

Om de gebruiksvriendelijkheid van onze website en diensten te optimaliseren maken wij gebruik van cookies. Deze cookies gebruiken wij voor functionaliteiten, analytische gegevens en marketing doeleinden. U vindt meer informatie in onze privacy statement.