preg_match negatieve getallen

Overzicht Reageren

Sponsored by: Vacatures door Monsterboard

Front-End Developer

Als Front-End Developer bij Coolblue verbeter je de gebruiksvriendelijkheid van onze webshop voor miljoenen klanten. Wat doe je als Front-End Developer bij Coolblue? Als Front-end Developer werk je aan de gebruiksvriendelijkheid van onze webshop voor miljoenen klanten. Je vindt het leuk om samen te werken met de UX designer om stories op te pakken. Je krijgt energie van het bedenken van creatieve oplossingen en presenteert dit graag binnen het team. Daarnaast ben je trots op je werk en verwelkomt alle feedback. Ook Front-end Developer worden bij Coolblue? Lees hieronder of het bij je past. Dit vind je leuk om te

Bekijk vacature »

C# .NET Developer

Functie omschrijving Wij zijn op zoek naar een C# .NET Developer voor een bedrijf in de omgeving van Utrecht! Wil jij werken voor een internationaal bedrijf waar je legio mogelijkheden krijgt als Software Ontwikkelaar? Grijp nu je kans! Je kunt een uitdagende rol gaan vervullen als C#.NET Developer binnen een internationaal bedrijf dat gevestigd is in omgeving van Utrecht. Je zult gaan samenwerken met collega's die over de hele wereld verspreid zitten. Dit bedrijf is zeer vooruitstrevend en werkt met de nieuwste technieken. Als C#.NET Developer ga jij je bezig houden met het volgende: Je blijft op de hoogte van

Bekijk vacature »

Medior Java developer (fullstack)

Wat je gaat doen: Of beter nog, wat wil jij doen? Binnen DPA GEOS zijn we dan ook op zoek naar enthousiaste Java developers om ons development team te versterken. Als Java developer werk je in Agile/Scrum teams bij onze klanten en daarbij kun je eventueel ook andere ontwikkelaars begeleiden in het softwareontwikkelproces. Verder draag je positief bij aan de teamgeest binnen een projectteam en je kijkt verder dan je eigen rol. Je gaat software maken voor verschillende opdrachtgevers in jouw regio. Je bent een professional die het IT-vak serieus neemt en kwaliteit levert. Je leert snel vanwege je diepgaande

Bekijk vacature »

Senior PHP developer

Functie Als Senior PHP developer heb je een sterke mening over de architectuur van projecten en de processen binnen het team. Je bent de sparringpartner voor je Team Lead. Ook ondersteun je met jouw kennis de minder ervaren developers in jouw team. Ze werken regelmatig aan projecten vanaf scratch en dit geeft ruimte om voor nieuwe technieken te kiezen. Naast het ontwikkelen van software ben je continue bezig om ook jezelf te ontwikkelen. Ze werken met o.a.: PHP, Laravel, Doctrine, PHP Unit, Behat, React, TypeScript, (My)SQL, Postgress, Redis, ElasticSearch, Docker, Nginx, GIT flow, JIRA, AWS. Eisen • HBO werk- en

Bekijk vacature »

Cymer Patch Server Developer

Vacature details Vakgebied: Software/IT Opleiding: Senior Werklocatie: Veldhoven Vacature ID: 12919 Introductie This new patch server will be built on Python and Django ReST and GraphQL services with a React frontend, it will consist of several microservices and run on a Kubernetes cluster. It will be supported by several middleware applications such as ElasticSearch, Redis, RabbitMQ, Oracle and Artifactory. Functieomschrijving The Patch Admin team always aim to deliver software at a high quality, we avoid sacrifices here to maintain our velocity. Practically this means that we practice test driven development and perform end-to-end automated testing on our software. This means

Bekijk vacature »

Java Developer

Vacature details Vakgebied: Software/IT Opleiding: Senior Werklocatie: Eindhoven Vacature ID: 12946 Introductie We are looking for a Java Developer! Our client is one of the most innovation companies located within the Netherlands. We provide high quality software in a high-tech and challenging market. Functieomschrijving The department is specialized in creating and developing high quality software for manufacturing automation in a high tech environment. We strive to provide our clients with high quality software and deliver state of the art solutions in a variety of ways. Creating software infrastructure using Java SE / EE Create applications to fine tune manufacturing processes

Bekijk vacature »

Back-end PHP Software Developer - Juniorfunctie

Functieomschrijving Wij zijn op zoek naar een PHP Software Developer om ons team te versterken en mee te werken aan de ontwikkeling van eigen IOT-oplossingen. In deze functie ben je verantwoordelijk voor het bouwen van webapplicaties, apps en dashboards voor het uitlezen en managen van sensoren in machines. Je werkt nauw samen met een team van ontwikkelaars en engineers om de beste software-oplossingen te creëren. Jouw werkzaamheden zien er als volgt uit: Je bent in deze rol verantwoordelijk voor het ontwerpen, ontwikkelen en onderhouden van webapplicaties en softwaretoepassingen voor in-house ontwikkelde IOT oplossingen. Je werkt aan complexe databases en back-end

Bekijk vacature »

Ontwikkelaar Identity & Access Management

Dit ga je doen Als Identity & Access Management Ontwikkelaar zorg jij er voor dat studenten, medewerkers en docenten de juiste benodigdheden op het juiste moment kunnen gebruiken; Het juist opslaan van onderzoeksdata en het openbaar beschikbaar stellen van publicaties (Open Access); Studenten, collega's en wetenschappers ondersteunen; Agile en Scrum werken; Technisch Applicatiebeheer; Ontwikkelen in One Identity Manager en VB.NET. Hier ga je werken Als Ontwikkelaar kom je terecht in een hecht team die zich richt op wetenschappelijke informatie en ICT. Jij bent degene die er voor zorgt dat alle informatie, uit diverse onderzoeken, bij de juiste personen terecht komt.

Bekijk vacature »

Ervaren Full-Stack PHP Developer

Functieomschrijving Gezocht! Ervaren PHP Developer! Voor een organisatie in de regio Harderwijk zoeken wij een ervaren PHP Developer die het IT team van dit bedrijf gaat versterken. We zijn op zoek naar een enthousiaste en breed georiënteerde IT-er die het innovatieve bedrijf nog een stap verder kan brengen. Voor deze functie zoeken wij iemand die communicatief goed is en die zelfstandig problemen op kan lossen. Je werkt samen met een externe ontwikkelpartij en kunt hun dus uitdagen op het geleverde werk. Het schrijven van concepten aan de AI en hardware kant valt onder je verantwoordelijkheden. Het bedrijf noemt zichzelf een

Bekijk vacature »

Medior front-end developer gezocht (€3.300 -

Functie Wat ga je doen? Jij als front-end developer gaat werken binnen de teams van/voor onze klant. Je werkt in een team met starters en ervaren ontwikkelaars met allemaal 1 overeenkomst; passie voor het vak. Maak je een fout? Geen probleem, leer ervan en ga dan weer door. Door de variëteit aan werk kun je in verschillende omgevingen een kijkje nemen en jezelf dus snel ontwikkelen. Wat hebben we jou te bieden? • Uitdagende projecten bij mooie klanten (bij jou in de buurt, of binnenkort intern vanuit ons kantoor!) • Een jonge organisatie met talentvolle collega’s • Veel ruimte voor

Bekijk vacature »

Software Developer Java

Java/Kotlin Developer Ben jij een ervaren Java/Kotlin developer met een passie voor het automatiseren van bedrijfsprocessen? Wil je graag deelnemen aan uitdagende projecten bij aansprekende klanten? En ben je op zoek naar een professioneel, ambitieus en dynamisch bedrijf om je carrière verder te ontwikkelen? Kom dan ons team bij Ritense in Amsterdam versterken! Zo ziet de functie eruit: Als Java/Kotlin developer bij Ritense ben je verantwoordelijk voor de ontwikkeling en implementatie van applicaties die bedrijfsprocessen automatiseren, zodat onze klanten slimmer, efficiënter en klantgerichter kunnen werken. Als developer ben je in de lead en zorg je voor de correcte oplevering van

Bekijk vacature »

Fullstack Developer

Functieomschrijving Voor een erkende werkgever in regio Etten-Leur zijn wij op zoek naar een Fullstack Developer met PHP/Laravel ervaring. Je gaat aan de slag met het bouwen van maatwerk software voor klanten die actief zijn in een specifieke markt. Als fullstack developer ben je samen met een enthousiast team van 7 collega’s verantwoordelijk voor de ontwikkeling, beheer en innovatie van informatiesystemen voor klanten in een specifieke branche. Verder ondersteun je complexe uitdagingen van klanten. Je brengt hun wensen in kaart en vertaalt deze door naar maatwerk software. Ervaring met Laravel is een must. Om de klant zo goed mogelijk te

Bekijk vacature »

Applicatie ontwikkelaar

Functie omschrijving Zelfstandige applicatie ontwikkelaar gezocht voor familiair bedrijf in omgeving Barendrecht! Ben jij op zoek naar een nieuwe uitdaging en zoek jij een informele werkgever waar je zelfstandig kunt werken binnen een leuk IT team, lees dan snel verder want wie weet zijn wij op zoek naar jou! Binnen deze rol houdt jij je met het volgende bezig: Onderhouden en ontwikkelen van de IT systemen; Opzetten van Azure Cloud systemen, denk aan interfaces, hardware op de Cloud, webportalen of BI functies; Werken aan scripts binnen verschillende software applicaties, denk aan ERP en CAD; Ontwikkelen en implementeren van MS PowerApps

Bekijk vacature »

Senior Front-end Developer

Dit ga je doen Met behulp van diverse programmeertalen ontwikkelen van Front-end software; Het begeleiden van het front-end team; Het oplossen van incidenten; Het bijhouden van een backlog; Je hebt een actieve bijdrage in de wekelijkse overleggen met de omliggende teams; Je houdt trends bij en adviseert het management hierover waar nodig; Helder communiceren met de stakeholders om hen zo mee te nemen in projecten en laten inzien wat de duur en toegevoegde waarde van bepaalde projecten is. Hier ga je werken Deze organisatie heeft circa 40 miljoen bezoekers per maand en heeft innovatie hoog in het vaandel staan. Het

Bekijk vacature »

Database developer - SQL

Functie omschrijving Kan jij goed overweg met complexe algoritmes en het schrijven van procedures in T-SQL? Heb jij al wat ervaring opgedaan met SQL en vind je het tijd voor de volgende stap? Lees dan snel verder! Dit software bedrijf, gespecialiseerd in de ontwikkeling van logistieke software, is op zoek naar een ervaren SQL database developer. Jouw werkzaamheden zullen onder andere bestaan uit: Je sluit aan bij meetings en brengt het gehele logistieke proces in kaart. Vervolgens ga je als lead developer aan de slag om de klus te klaren. Je stuurt het junior developer team en helpt, zo nodig,

Bekijk vacature »
Arnold Dijkman

Arnold Dijkman

28/02/2019 11:45:42
Quote Anchor link
Hallo,

Ik zit met het volgende probleem:

Al jaren maak ik gebruik van een open source urenregistratiesysteem. Het werk vlekkeloos.
Nu komt de wens om negatieve uren te kunnen schrijven, en standaard ondersteunt de software dit niet (alleen positieve uren zijn toegestaan).
Graag zou ik dat met een aanpassing in de code willen realiseren.

Hieronder de code:

Code (php)
PHP script in nieuw venster Selecteer het PHP script
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
<?php


import('DateAndTime');

// The ttTimeHelper is a class to help with time-related values.
class ttTimeHelper {

  // isWeekend determines if $date falls on weekend.
  static function isWeekend($date) {
    $weekDay = date('w', strtotime($date));
    return ($weekDay == WEEKEND_START_DAY || $weekDay == (WEEKEND_START_DAY + 1) % 7);
  }


  // isHoliday determines if $date falls on a holiday.
  static function isHoliday($date) {
    global $user;
    global $i18n;

    if (!$user->show_holidays) return false;

    // $date is expected as string in DB_DATEFORMAT.
    $month = date('m', strtotime($date));
    $day = date('d', strtotime($date));
    if (in_array($month.'/'.$day, $i18n->holidays))
      return true;

    return false;
  }


  // isValidTime validates a value as a time string.
  static function isValidTime($value) {
    if (strlen($value)==0 || !isset($value)) return false;

    // 24 hour patterns.
    if ($value == '24:00' || $value == '2400') return true;

    if (preg_match('/^([0-1]{0,1}[0-9]|[2][0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
    }

    if (preg_match('/^([0-1]{0,1}[0-9]|[2][0-4])$/', $value )) { // 0 - 24
      return true;
    }


    // 12 hour patterns
    if (preg_match('/^[1-9]\s?(am|AM|pm|PM)$/', $value)) { // 1 - 9 am
      return true;
    }

    if (preg_match('/^(0[1-9]|1[0-2])\s?(am|AM|pm|PM)$/', $value)) { // 01 - 12 am
      return true;
    }

    if (preg_match('/^[1-9]:?[0-5][0-9]\s?(am|AM|pm|PM)$/', $value)) { // 1:00 - 9:59 am, 100 - 959 am
      return true;
    }

    if (preg_match('/^(0[1-9]|1[0-2]):?[0-5][0-9]\s?(am|AM|pm|PM)$/', $value)) { // 01:00 - 12:59 am, 0100 - 1259 am
      return true;
    }


    return false;
  }


  // isValidDuration validates a value as a time duration string (in hours and minutes).
  static function isValidDuration($value) {
    if (strlen($value) == 0 || !isset($value)) return false;

    if ($value == '24:00' || $value == '2400') return true;

    if (preg_match('/^([0-1]{0,1}[0-9]|2[0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
    }

    if (preg_match('/^([0-1]{0,1}[0-9]|2[0-4])h?$/', $value )) { // 0, 1 ... 24
      return true;
    }


    global $user;
    $localizedPattern = '/^([0-1]{0,1}[0-9]|2[0-3])?['.$user->decimal_mark.'][0-9]{1,4}h?$/';
    if (preg_match($localizedPattern, $value )) { // decimal values like 0.5, 1.25h, ... .. 23.9999h (or with comma)
      return true;
    }


    return false;
  }


  // postedDurationToMinutes - converts a value representing a duration
  // (usually enetered in a form by a user) to an integer number of minutes.
  //
  // Parameters:
  //   $duration - user entered duration string. Valid strings are:
  //               3 or 3h - means 3 hours. Note: h and m letters are not localized.
  //               0.25 or 0.25h or .25 or .25h - means a quarter of hour.
  //               0,25 or 0,25h or ,25 or ,25h - same as above for users with comma ad decimal mark.
  //               1:30 - means 1 hour 30 minutes.
  //               25m - means 25 minutes.
  //   $max - maximum number of minutes that is valid.
  //
  //   At the moment, we have 2 variations of duration types:
  //   1) A duration within a day, such as in a time entry.
  //   These are less or equal to 24*60 minutes.
  //
  //   2) A duration of a monthly quota, with max value of 31*24*60 minutes.
  //
  // This function is generic to be used for both types.
  //
  // Returns false if the value cannot be converted.

  static function postedDurationToMinutes($duration, $max = 1440) {
    // Handle empty value.
    if (!isset($duration) || strlen($duration) == 0)
      return null; // Value is not set. Caller decides whether it is valid or not.

    // Handle whole hours.

    if (preg_match('/^\d{1,3}h?$/', $duration )) { // 0 - 999, 0h - 999h
      $minutes = 60 * trim($duration, 'h');
      return $minutes > $max ? false : $minutes;
    }


    // Handle a normalized duration value.
    if (preg_match('/^\d{1,3}:[0-5][0-9]$/', $duration )) { // 0:00 - 999:59
      $time_array = explode(':', $duration);
      $minutes = (int)@$time_array[1] + ((int)@$time_array[0]) * 60;
      return $minutes > $max ? false : $minutes;
    }


    // Handle localized fractional hours.
    global $user;
    $localizedPattern = '/^(\d{1,3})?['.$user->getDecimalMark().'][0-9]{1,4}h?$/';
    if (preg_match($localizedPattern, $duration )) { // decimal values like .5, 1.25h, ... .. 999.9999h (or with comma)
        if ($user->getDecimalMark() == ',')
          $duration = str_replace (',', '.', $duration);

        $minutes = (int)round(60 * floatval($duration));
        return $minutes > $max ? false : $minutes;
    }


    // Handle minutes. Some users enter durations like 10m (meaning 10 minutes).
    if (preg_match('/^\d{1,5}m$/', $duration )) { // 0m - 99999m
      $minutes = (int) trim($duration, 'm');
      return $minutes > $max ? false : $minutes;
    }


    // Everything else is not a valid duration.
    return false;
  }


  // minutesToDuration converts an integer number of minutes into duration string.
  // Formats returned HH:MM, HHH:MM, HH, or HHH.

  static function minutesToDuration($minutes, $abbreviate = false) {
    if ($minutes < 0) return false;

    $hours = (string) (int)($minutes / 60);
    $mins = (string) round(fmod($minutes, 60));
    if (strlen($mins) == 1)
      $mins = '0' . $mins;
    if ($abbreviate && $mins == '00')
      return $hours;

    return $hours.':'.$mins;
  }


  // toMinutes - converts a time string in format 00:00 to a number of minutes.
  static function toMinutes($value) {
    $time_a = explode(':', $value);
    return (int)@$time_a[1] + ((int)@$time_a[0]) * 60;
  }


  // toAbsDuration - converts a number of minutes to format 0:00
  // even if $minutes is negative.

  static function toAbsDuration($minutes, $abbreviate = false){
    $hours = (string)((int)abs($minutes / 60));
    $mins = (string) round(abs(fmod($minutes, 60)));
    if (strlen($mins) == 1)
      $mins = '0' . $mins;
    if ($abbreviate && $mins == '00')
      return $hours;

    return $hours.':'.$mins;
  }


  // toDuration - calculates duration between start and finish times in 00:00 format.
  static function toDuration($start, $finish) {
    $duration_minutes = ttTimeHelper::toMinutes($finish) - ttTimeHelper::toMinutes($start);
    if ($duration_minutes <= 0) return false;

    return ttTimeHelper::toAbsDuration($duration_minutes);
  }


  // The to12HourFormat function converts a 24-hour time value (such as 15:23) to 12 hour format (03:23 PM).
  static function to12HourFormat($value) {
    if ('24:00' == $value) return '12:00 AM';

    $time_a = explode(':', $value);
    if ($time_a[0] > 12)
      $res = (string)((int)$time_a[0] - 12).':'.$time_a[1].' PM';
    elseif ($time_a[0] == 12)
      $res = $value.' PM';
    elseif ($time_a[0] == 0)
      $res = '12:'.$time_a[1].' AM';
    else
      $res = $value.' AM';
    return $res;
  }


  // The to24HourFormat function attempts to convert a string value (human readable notation of time of day)
  // to a 24-hour time format HH:MM.

  static function to24HourFormat($value) {
    $res = null;

    // Algorithm: use regular expressions to find a matching pattern, starting with most popular patterns first.
    $tmp_val = trim($value);

    // 24 hour patterns.
    if (preg_match('/^([01][0-9]|2[0-3]):[0-5][0-9]$/', $tmp_val)) { // 00:00 - 23:59
      // We already have a 24-hour format. Just return it.

      $res = $tmp_val;
      return $res;
    }

    if (preg_match('/^[0-9]:[0-5][0-9]$/', $tmp_val)) { // 0:00 - 9:59
      // This is a 24-hour format without a leading zero. Add 0 and return.

      $res = '0'.$tmp_val;
      return $res;
    }

    if (preg_match('/^[0-9]$/', $tmp_val)) { // 0 - 9
      // Single digit. Assuming hour number.

      $res = '0'.$tmp_val.':00';
      return $res;
    }

    if (preg_match('/^([01][0-9]|2[0-4])$/', $tmp_val)) { // 00 - 24
      // Two digit hour number.

      $res = $tmp_val.':00';
      return $res;
    }

    if (preg_match('/^[0-9][0-5][0-9]$/', $tmp_val)) { // 000 - 959
      // Missing colon. We'll assume the first digit is the hour, the rest is minutes.

      $tmp_arr = str_split($tmp_val);
      $res = '0'.$tmp_arr[0].':'.$tmp_arr[1].$tmp_arr[2];
      return $res;
    }

    if (preg_match('/^([01][0-9]|2[0-3])[0-5][0-9]$/', $tmp_val)) { // 0000 - 2359
      // Missing colon. We'll assume the first 2 digits are the hour, the rest is minutes.

      $tmp_arr = str_split($tmp_val);
      $res = $tmp_arr[0].$tmp_arr[1].':'.$tmp_arr[2].$tmp_arr[3];
      return $res;
    }

    // Special handling for midnight.
    if ($tmp_val == '24:00' || $tmp_val == '2400')
      return '24:00';

    // 12 hour AM patterns.
    if (preg_match('/.(am|AM)$/', $tmp_val)) {

      // The $value ends in am or AM. Strip it.
      $tmp_val = rtrim(substr($tmp_val, 0, -2));

      // Special case to handle 12, 12:MM, and 12MM AM.
      if (preg_match('/^12:?([0-5][0-9])?$/', $tmp_val))
        $tmp_val = '00'.substr($tmp_val, 2);

      // We are ready to convert AM time.
      if (preg_match('/^(0[0-9]|1[0-1]):[0-5][0-9]$/', $tmp_val)) { // 00:00 - 11:59
        // We already have a 24-hour format. Just return it.

        $res = $tmp_val;
        return $res;
      }

      if (preg_match('/^[1-9]:[0-5][0-9]$/', $tmp_val)) { // 1:00 - 9:59
        // This is a 24-hour format without a leading zero. Add 0 and return.

        $res = '0'.$tmp_val;
        return $res;
      }

      if (preg_match('/^[1-9]$/', $tmp_val)) { // 1 - 9
        // Single digit. Assuming hour number.

        $res = '0'.$tmp_val.':00';
        return $res;
      }

      if (preg_match('/^(0[0-9]|1[0-1])$/', $tmp_val)) { // 00 - 11
        // Two digit hour number.

        $res = $tmp_val.':00';
        return $res;
      }

      if (preg_match('/^[1-9][0-5][0-9]$/', $tmp_val)) { // 100 - 959
        // Missing colon. Assume the first digit is the hour, the rest is minutes.

        $tmp_arr = str_split($tmp_val);
        $res = '0'.$tmp_arr[0].':'.$tmp_arr[1].$tmp_arr[2];
        return $res;
      }

      if (preg_match('/^(0[0-9]|1[0-1])[0-5][0-9]$/', $tmp_val)) { // 0000 - 1159
        // Missing colon. We'll assume the first 2 digits are the hour, the rest is minutes.

        $tmp_arr = str_split($tmp_val);
        $res = $tmp_arr[0].$tmp_arr[1].':'.$tmp_arr[2].$tmp_arr[3];
        return $res;
      }
    }
// AM cases handling.

    // 12 hour PM patterns.

    if (preg_match('/.(pm|PM)$/', $tmp_val)) {

      // The $value ends in pm or PM. Strip it.
      $tmp_val = rtrim(substr($tmp_val, 0, -2));

      if (preg_match('/^[1-9]$/', $tmp_val)) { // 1 - 9
        // Single digit. Assuming hour number.

        $hour = (string)(12 + (int)$tmp_val);
        $res = $hour.':00';
        return $res;
      }

      if (preg_match('/^((0[1-9])|(1[0-2]))$/', $tmp_val)) { // 01 - 12
        // Double digit hour.

        if ('12' != $tmp_val)
          $tmp_val = (string)(12 + (int)$tmp_val);
        $res = $tmp_val.':00';
        return $res;
      }

      if (preg_match('/^[1-9][0-5][0-9]$/', $tmp_val)) { // 100 - 959
        // Missing colon. We'll assume the first digit is the hour, the rest is minutes.

        $tmp_arr = str_split($tmp_val);
        $hour = (string)(12 + (int)$tmp_arr[0]);
        $res = $hour.':'.$tmp_arr[1].$tmp_arr[2];
        return $res;
      }

      if (preg_match('/^(0[1-9]|1[0-2])[0-5][0-9]$/', $tmp_val)) { // 0100 - 1259
        // Missing colon. We'll assume the first 2 digits are the hour, the rest is minutes.

        $hour = substr($tmp_val, 0, -2);
        $min = substr($tmp_val, 2);
        if ('12' != $hour)
          $hour = (string)(12 + (int)$hour);
        $res = $hour.':'.$min;
        return $res;
      }

      if (preg_match('/^[1-9]:[0-5][0-9]$/', $tmp_val)) { // 1:00 - 9:59
        $hour = substr($tmp_val, 0, -3);
        $min = substr($tmp_val, 2);
        $hour = (string)(12 + (int)$hour);
        $res = $hour.':'.$min;
        return $res;
      }

      if (preg_match('/^(0[1-9]|1[0-2]):[0-5][0-9]$/', $tmp_val)) { // 01:00 - 12:59
        $hour = substr($tmp_val, 0, -3);
        $min = substr($tmp_val, 3);
        if ('12' != $hour)
          $hour = (string)(12 + (int)$hour);
        $res = $hour.':'.$min;
        return $res;
      }
    }
// PM cases handling.

    return $res;
  }


  // isValidInterval - checks if finish time is greater than start time.
  static function isValidInterval($start, $finish) {
    $start = ttTimeHelper::to24HourFormat($start);
    $finish = ttTimeHelper::to24HourFormat($finish);
    if ('00:00' == $finish) $finish = '24:00';

    $minutesStart = ttTimeHelper::toMinutes($start);
    $minutesFinish = ttTimeHelper::toMinutes($finish);
    if ($minutesFinish > $minutesStart)
      return true;

    return false;
  }


  // insert - inserts a time record into tt_log table. Does not deal with custom fields.
  static function insert($fields)
  {

    global $user;
    $mdb2 = getConnection();

    $user_id = (int) $fields['user_id'];
    $group_id = (int) $fields['group_id'];
    $org_id = (int) $fields['org_id'];
    $date = $fields['date'];
    $start = $fields['start'];
    $finish = $fields['finish'];
    $duration = $fields['duration'];
    if ($duration) {
      $minutes = ttTimeHelper::postedDurationToMinutes($duration);
      $duration = ttTimeHelper::minutesToDuration($minutes);
    }

    $client = $fields['client'];
    $project = $fields['project'];
    $task = $fields['task'];
    $invoice = $fields['invoice'];
    $note = $fields['note'];
    $billable = $fields['billable'];
    $paid = $fields['paid'];
    if (array_key_exists('status', $fields)) { // Key exists and may be NULL during migration of data.
      $status_f = ', status';
      $status_v = ', '.$mdb2->quote($fields['status']);
    }


    $start = ttTimeHelper::to24HourFormat($start);
    if ($finish) {
      $finish = ttTimeHelper::to24HourFormat($finish);
      if ('00:00' == $finish) $finish = '24:00';
    }


    $created_v = ', now(), '.$mdb2->quote($_SERVER['REMOTE_ADDR']).', '.$user->id;

    if (!$billable) $billable = 0;
    if (!$paid) $paid = 0;

    if ($duration) {
      $sql = "insert into tt_log (user_id, group_id, org_id, date, duration, client_id, project_id, task_id, invoice_id, comment, billable, paid, created, created_ip, created_by $status_f) ".
        "values ($user_id, $group_id, $org_id, ".$mdb2->quote($date).", '$duration', ".$mdb2->quote($client).", ".$mdb2->quote($project).", ".$mdb2->quote($task).", ".$mdb2->quote($invoice).", ".$mdb2->quote($note).", $billable, $paid $created_v $status_v)";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }
else {
      $duration = ttTimeHelper::toDuration($start, $finish);
      if ($duration === false) $duration = 0;
      if (!$duration && ttTimeHelper::getUncompleted($user_id)) return false;

      $sql = "insert into tt_log (user_id, group_id, org_id, date, start, duration, client_id, project_id, task_id, invoice_id, comment, billable, paid, created, created_ip, created_by $status_f) ".
        "values ($user_id, $group_id, $org_id, ".$mdb2->quote($date).", '$start', '$duration', ".$mdb2->quote($client).", ".$mdb2->quote($project).", ".$mdb2->quote($task).", ".$mdb2->quote($invoice).", ".$mdb2->quote($note).", $billable, $paid $created_v $status_v)";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }


    $id = $mdb2->lastInsertID('tt_log', 'id');
    return $id;
  }


  // update - updates a record in log table. Does not update its custom fields.
  static function update($fields)
  {

    global $user;
    $mdb2 = getConnection();

    $id = $fields['id'];
    $date = $fields['date'];
    $user_id = $fields['user_id'];
    $client = $fields['client'];
    $project = $fields['project'];
    $task = $fields['task'];
    $start = $fields['start'];
    $finish = $fields['finish'];
    $duration = $fields['duration'];
    if ($duration) {
      $minutes = ttTimeHelper::postedDurationToMinutes($duration);
      $duration = ttTimeHelper::minutesToDuration($minutes);
    }

    $note = $fields['note'];

    $billable_part = '';
    if ($user->isPluginEnabled('iv')) {
      $billable_part = $fields['billable'] ? ', billable = 1' : ', billable = 0';
    }

    $paid_part = '';
    if ($user->can('manage_invoices') && $user->isPluginEnabled('ps')) {
      $paid_part = $fields['paid'] ? ', paid = 1' : ', paid = 0';
    }

    $modified_part = ', modified = now(), modified_ip = '.$mdb2->quote($_SERVER['REMOTE_ADDR']).', modified_by = '.$user->id;

    $start = ttTimeHelper::to24HourFormat($start);
    $finish = ttTimeHelper::to24HourFormat($finish);
    if ('00:00' == $finish) $finish = '24:00';
    
    if ($start) $duration = '';

    if ($duration) {
      $sql = "UPDATE tt_log set start = NULL, duration = '$duration', client_id = ".$mdb2->quote($client).", project_id = ".$mdb2->quote($project).", task_id = ".$mdb2->quote($task).", ".
        "comment = ".$mdb2->quote($note)."$billable_part $paid_part $modified_part, date = '$date' WHERE id = $id";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }
else {
      $duration = ttTimeHelper::toDuration($start, $finish);
      if ($duration === false)
        $duration = 0;
      $uncompleted = ttTimeHelper::getUncompleted($user_id);
      if (!$duration && $uncompleted && ($uncompleted['id'] != $id))
        return false;

      $sql = "UPDATE tt_log SET start = '$start', duration = '$duration', client_id = ".$mdb2->quote($client).", project_id = ".$mdb2->quote($project).", task_id = ".$mdb2->quote($task).", ".
        "comment = ".$mdb2->quote($note)."$billable_part $paid_part $modified_part, date = '$date' WHERE id = $id";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }

    return true;
  }


  // delete - deletes a record from tt_log table and its associated custom field values.
  static function delete($id) {
    global $user;
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $sql = "update tt_log set status = null".
      " where id = $id and user_id = $user_id and group_id = $group_id and org_id = $org_id";
    $affected = $mdb2->exec($sql);
    if (is_a($affected, 'PEAR_Error'))
      return false;

    $sql = "update tt_custom_field_log set status = null".
      " where log_id = $id and group_id = $group_id and org_id = $org_id";
    $affected = $mdb2->exec($sql);
    if (is_a($affected, 'PEAR_Error'))
      return false;

    return true;
  }


  // getTimeForDay - gets total time for a user for a specific date.
  static function getTimeForDay($date) {
    global $user;
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $sql = "select sum(time_to_sec(duration)) as sm from tt_log".
      " where user_id = $user_id and group_id = $group_id and org_id = $org_id and date = '$date' and status = 1";
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      $val = $res->fetchRow();
      return sec_to_time_fmt_hm($val['sm']);
    }

    return false;
  }


  // getTimeForWeek - gets total time for a user for a given week.
  static function getTimeForWeek($date) {
    global $user;
    import('Period');
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $period = new Period(INTERVAL_THIS_WEEK, $date);
    $sql = "select sum(time_to_sec(duration)) as sm from tt_log".
      " where user_id = $user_id and group_id = $group_id and org_id = $org_id".
      " and date >= '".$period->getStartDate(DB_DATEFORMAT)."' and date <= '".$period->getEndDate(DB_DATEFORMAT)."' and status = 1";
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      $val = $res->fetchRow();
      return sec_to_time_fmt_hm($val['sm']);
    }

    return false;
  }


  // getTimeForMonth - gets total time for a user for a given month.
  static function getTimeForMonth($date) {
    global $user;
    import('Period');
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $period = new Period(INTERVAL_THIS_MONTH, $date);
    $sql = "select sum(time_to_sec(duration)) as sm from tt_log".
      " where user_id = $user_id and group_id = $group_id and org_id = $org_id".
      " and date >= '".$period->getStartDate(DB_DATEFORMAT)."' and date <= '".$period->getEndDate(DB_DATEFORMAT)."' and status = 1";
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      $val = $res->fetchRow();
      return sec_to_time_fmt_hm($val['sm']);
    }

    return false;
  }


  // getUncompleted - retrieves an uncompleted record for user, if one exists.
  static function getUncompleted($user_id) {
    $mdb2 = getConnection();

    $sql = "select id, start from tt_log  
      where user_id = $user_id and start is not null and time_to_sec(duration) = 0 and status = 1"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      if (!$res->numRows()) {
        return false;
      }

      if ($val = $res->fetchRow()) {
        return $val;
      }
    }

    return false;
  }


  // overlaps - determines if a record overlaps with an already existing record.
  //
  // Parameters:
  //   $user_id - user id for whom to determine overlap
  //   $date - date
  //   $start - new record start time
  //   $finish - new record finish time, may be null
  //   $record_id - optional record id we may be editing, excluded from overlap set

  static function overlaps($user_id, $date, $start, $finish, $record_id = null) {
    // Do not bother checking if we allow overlaps.
    global $user;
    if ($user->allow_overlap) return false;

    $mdb2 = getConnection();

    $start = ttTimeHelper::to24HourFormat($start);
    if ($finish) {
      $finish = ttTimeHelper::to24HourFormat($finish);
      if ('00:00' == $finish) $finish = '24:00';
    }

    // Handle these 3 overlap situations:
    // - start time in existing record
    // - end time in existing record
    // - record fully encloses existing record

    $sql = "select id from tt_log  
      where user_id = $user_id and date = "
.$mdb2->quote($date)."
      and start is not null and duration is not null and status = 1 and (
      (cast("
.$mdb2->quote($start)." as time) >= start and cast(".$mdb2->quote($start)." as time) < addtime(start, duration))";
    if ($finish) {
      $sql .= " or (cast(".$mdb2->quote($finish)." as time) <= addtime(start, duration) and cast(".$mdb2->quote($finish)." as time) > start)
      or (cast("
.$mdb2->quote($start)." as time) < start and cast(".$mdb2->quote($finish)." as time) > addtime(start, duration))";
    }

    $sql .= ")";
    if ($record_id) {
      $sql .= " and id <> $record_id";
    }

    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      if (!$res->numRows()) {
        return false;
      }

      if ($val = $res->fetchRow()) {
        return $val;
      }
    }

    return false;
  }


  // getRecord - retrieves a time record identified by its id.
  static function getRecord($id, $user_id) {
    global $user;
    $sql_time_format = "'%k:%i'"; //  24 hour format.
    if ('%I:%M %p' == $user->time_format)
      $sql_time_format = "'%h:%i %p'"; // 12 hour format for MySQL TIME_FORMAT function.

    $mdb2 = getConnection();

    $sql = "select l.id as id, TIME_FORMAT(l.start, $sql_time_format) as start,
      TIME_FORMAT(sec_to_time(time_to_sec(l.start) + time_to_sec(l.duration)), $sql_time_format) as finish,
      TIME_FORMAT(l.duration, '%k:%i') as duration,
      p.name as project_name, t.name as task_name, l.comment, l.client_id, l.project_id, l.task_id, l.invoice_id, l.billable, l.paid, l.date
      from tt_log l
      left join tt_projects p on (p.id = l.project_id)
      left join tt_tasks t on (t.id = l.task_id)
      where l.id = $id and l.user_id = $user_id and l.status = 1"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      if (!$res->numRows()) {
        return false;
      }

      if ($val = $res->fetchRow()) {
        return $val;
      }
    }

    return false;
  }


  // getAllRecords - returns all time records for a certain user.
  static function getAllRecords($user_id) {
    $result = array();

    $mdb2 = getConnection();

    $sql = "select l.id, l.user_id, l.date, TIME_FORMAT(l.start, '%k:%i') as start,
      TIME_FORMAT(sec_to_time(time_to_sec(l.start) + time_to_sec(l.duration)), '%k:%i') as finish,
      TIME_FORMAT(l.duration, '%k:%i') as duration,
      l.client_id, l.project_id, l.task_id, l.invoice_id, l.comment, l.billable, l.paid, l.status
      from tt_log l where l.user_id = $user_id order by l.id"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      while ($val = $res->fetchRow()) {
        $result[] = $val;
      }
    }
else return false;

    return $result;
  }


  // getRecords - returns time records for a user for a given date.
  static function getRecords($user_id, $date) {
    global $user;
    $mdb2 = getConnection();

    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $sql_time_format = "'%k:%i'"; //  24 hour format.
    if ('%I:%M %p' == $user->getTimeFormat())
      $sql_time_format = "'%h:%i %p'"; // 12 hour format for MySQL TIME_FORMAT function.

    $client_field = null;
    if ($user->isPluginEnabled('cl'))
      $client_field = ", c.name as client";

    $left_joins = " left join tt_projects p on (l.project_id = p.id)".
      " left join tt_tasks t on (l.task_id = t.id)";
    if ($user->isPluginEnabled('cl'))
      $left_joins .= " left join tt_clients c on (l.client_id = c.id)";

    $result = array();
    $sql = "select l.id as id, TIME_FORMAT(l.start, $sql_time_format) as start,
      TIME_FORMAT(sec_to_time(time_to_sec(l.start) + time_to_sec(l.duration)), $sql_time_format) as finish,
      TIME_FORMAT(l.duration, '%k:%i') as duration, p.name as project, t.name as task, l.comment, l.billable, l.invoice_id $client_field
      from tt_log l
      $left_joins
      where l.date = '$date' and l.user_id = $user_id and l.group_id = $group_id and l.org_id = $org_id and l.status = 1
      order by l.start, l.id"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      while ($val = $res->fetchRow()) {
        if($val['duration']=='0:00')
          $val['finish'] = '';
        $result[] = $val;
      }
    }
else return false;

    return $result;
  }


  // canAdd determines if we can add a record in case there is a limit.
  static function canAdd() {
    $mdb2 = getConnection();
    $sql = "select param_value from tt_site_config where param_name = 'exp_date'";
    $res = $mdb2->query($sql);
    $val = $res->fetchRow();
    if (!$val) return true; // No expiration date.

    if (strtotime($val['param_value']) > time())
      return true; // Expiration date exists but not reached.

    return false;
  }
}


?>


Zou iemand mij hiermee kunnen helpen?
 
PHP hulp

PHP hulp

28/03/2024 17:40:22
 
Adoptive Solution

Adoptive Solution

28/02/2019 12:57:15
Quote Anchor link
Voor de nieuwsgierigen onder ons, hier is de bron :

https://github.com/anuko/timetracker

Toevoeging op 28/02/2019 13:05:21:

Ik zie dat de vraag ook in het Anuko forum is gesteld :

https://www.anuko.com/forum/viewtopic.php?t=2009
 
Nick Vledder

Nick Vledder

28/02/2019 13:31:57
Quote Anchor link
PHP-Developer inhuren een optie?
 
Arnold Dijkman

Arnold Dijkman

28/02/2019 13:42:33
Quote Anchor link
Adoptive Solution op 28/02/2019 12:57:15:
Voor de nieuwsgierigen onder ons, hier is de bron :

https://github.com/anuko/timetracker

Toevoeging op 28/02/2019 13:05:21:

Ik zie dat de vraag ook in het Anuko forum is gesteld :

https://www.anuko.com/forum/viewtopic.php?t=2009


Klopt hoor, dat ben ik :)

En ik hoop dat iemand mij hier kan helpen ipv een PHP developer in te huren, wel zo leuk en leerzaam!
 
Adoptive Solution

Adoptive Solution

28/02/2019 14:15:49
Quote Anchor link
Edit:
Verwijzing naar persoonlijke gegevens en werkgever verwijderd.
Niet relevant voor dit topic.
Gewijzigd op 28/02/2019 15:52:32 door - Ariën -
 
Rob Doemaarwat

Rob Doemaarwat

28/02/2019 14:50:54
Quote Anchor link
-?
 
Arnold Dijkman

Arnold Dijkman

28/02/2019 14:54:00
Quote Anchor link
Rob Doemaarwat op 28/02/2019 14:50:54:
-?


Heb ik geprobeerd Rob, werkt niet.
Dit heb ik gedaan:
Code (php)
PHP script in nieuw venster Selecteer het PHP script
1
2
3
4
<?php
    if (preg_match('/^([0-1]{0,1}[0-9]|[2][0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
?>

gewijzigd in
Code (php)
PHP script in nieuw venster Selecteer het PHP script
1
2
3
4
<?php
    if (preg_match('/^-?([0-1]{0,1}[0-9]|[2][0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
?>
 
Rob Doemaarwat

Rob Doemaarwat

28/02/2019 15:04:05
Quote Anchor link
Nou ja, dat an sich werkt wel ($value mag dan bijvoorbeeld "-8:00" zijn), maar blijkbaar gaat het dan ergens anders mis in die 740 regels code (een PHP of MySQL functie die niet met negatieve tijden overweg kan, misschien zijn de velden in je database unsigned, enz). En dan is het nog niet beperkt tot die 740 regels van hierboven, als ik zo in die GitHub repo kijk, dan is er nog wel "iets meer". Je zult eerst zelf je probleem moeten proberen in te perken zodat je de vraag iets beter kunt stellen dan enkel "doet het niet".
 
Thomas van den Heuvel

Thomas van den Heuvel

28/02/2019 16:27:03
Quote Anchor link
Inderdaad, je kunt wel ergens een regexp rechtbreien maar dat wil helemaal niet zeggen dat dan ineens negatieve urenregistratie werkt... Je weet simpelweg de impact van zo'n wijziging niet tenzij je door alle bijbehorende relevante code gaat.

Heb je al gekeken of er een workaround is (bijvoorbeeld uren onder een speciale post boeken) of er een fork met deze uitbreiding?

Wellicht ook handig is de realisatie dat jij waarschijnlijk niet de enige bent die dit issue heeft, oftewel, dit probleem is waarschijnlijk niet uniek.
 
Nick Vledder

Nick Vledder

01/03/2019 11:22:43
Quote Anchor link
Zelf even de moeite nemen het "probleem" achter de vraag te isoleren, zou prettig zijn. "Het werkt niet" en vervolgens flink wat regels op een forum dumpen is niet zo chique.

PS Wat bedoel je trouwens met de opmerking "wel zo leuk en leerzaam!". Leuk voor jou en leerzaam voor iemand anders? Dus je gunt iemand anders wel een leercurve terwijl je zelf toekijkt? Wat vriendelijk van je.
Gewijzigd op 01/03/2019 11:33:48 door Nick Vledder
 
Ozzie PHP

Ozzie PHP

01/03/2019 14:30:32
Quote Anchor link
@Nick

>> Leuk voor jou en leerzaam voor iemand anders?

Dat zegt ie niet hoor.
 
Nick Vledder

Nick Vledder

02/03/2019 19:19:03
Quote Anchor link
Nee, maar hij spreekt het ook niet tegen.
 



Overzicht Reageren

 
 

Om de gebruiksvriendelijkheid van onze website en diensten te optimaliseren maken wij gebruik van cookies. Deze cookies gebruiken wij voor functionaliteiten, analytische gegevens en marketing doeleinden. U vindt meer informatie in onze privacy statement.