preg_match negatieve getallen

Overzicht Reageren

Sponsored by: Vacatures door Monsterboard

Web Developer

Bedrijfsomschrijving ENGIE Nederland is onderdeel van de beursgenoteerde ENGIE Groep. ENGIE is actief in 70 landen, met wereldwijd 150.000 medewerkers. Als groep is het de missie om bij te dragen aan de verduurzaming van de wereld. ENGIE Energie biedt energiediensten aan particulieren en grootzakelijk en gaat de uitdagingen van de energietransitie aan door het beschikbaar maken van duurzame energie, het streven de klimaatverandering tot een minimum te beperken, leveringszekerheid te bieden en zorg te dragen voor een verantwoord gebruik van de beschikbare resources. ENGIE Energie investeert daarom in hernieuwbare energiebronnen zoals zon, wind en bio-gas. Functieomschrijving Heb jij veel ervaring

Bekijk vacature »

Lead developer (PHP, Symfony, DDD)

Functie Als Lead developer zorg je ervoor dat het team (bestaande uit zowel junior als ervaren developers) in staat is om de kwaliteit van de software (en code) verder te verhogen. In samenwerking met het team, de product owner en de andere lead developers zet je technische lijnen uit en bepaal je de prioriteiten per sprint. Lijkt het jou interessant om complexe problemen op te lossen en bijvoorbeeld een nieuwe applicatiestructuur in Symfony op te zetten? Dan komen wij graag met je in contact. Eisen • HBO werk- en denkniveau (ze kijken niet naar papieren, maar naar denkniveau, motivatie en

Bekijk vacature »

Applicatieontwikkelaar ABAP

Bedrijfsomschrijving Functieomschrijving De kandidaat zal worden ingezet binnen een van de DevOps teams binnen SCI (Service Centrum Inburgering) voor het ontwerpen en bouwen in SAP ABAP van de binnen SCI gebruikte informatiesystemen. Voornaamste voorkomende werkzaamheden zijn het aanpassen van en bouwen van nieuwe programmatuur in ABAP (Objects), waarbij ook gebruikt wordt gemaakt van DDD (Domain Driven Design) en het opstellen/aanpassen van Functionele/Technische ontwerpen. Daarnaast moeten ook formulieren met SAP Smartforms worden aangepast. Verder speelt de overgang naar SAP4Hana en SAP CPI. Vanwege het veelvuldig gebruik van SAP PO is kennis hiervan een pré. Achtergrond opdracht Momenteel werken meerdere DevOps teams

Bekijk vacature »

Front-end developer

Functie Jij komt te werken in een team van 5 developers. het product is continue in beweging. Nieuwe en bestaande klanten vragen om vaak nieuwe features. Hierin ben jij zeer belangrijk om te zorgen dat de functionaliteiten goed opgezet worden op technisch vlak. Designs krijg je aangeleverd van een externe partij zodat jij je primair kan focussen op de techniek! Je hebt daarbij alle vrijheid om je eigen creativiteit toe te passen en mee te denken over de gebruikte technieken. Het gezamenlijke doel is een product dat functioneel zeer gebruiksvriendelijk is en het bedrijfsproces van de gebruikers versneld en kwalitatief

Bekijk vacature »

Back-end Developer Java

Dit ga je doen Het (door)ontwikkelen van een zelfgebouwde applicatie in Java, Spring Framework, SQL, HTML, CSS en Javascript; End-to-end beheer m.b.t. de applicatie en koppelen van applicaties binnen het landschap; Ontwikkelen van rapportages voor de interne organisatie; Ontwikkelen van aanvullende functionaliteiten m.b.t. de applicatie; Uitvoeren van testen en code reviews. Hier ga je werken Binnen deze organisatie kom je te werken op de afdeling die medische gegevens verzamelt vanuit het hele land. Denk hierbij aan vertrouwelijke persoonsgegevens. Het team verwerkt al deze data met als doel het waarborgen en verbeteren van de kwaliteit van de zorg in heel Nederland.

Bekijk vacature »

Social Media Specialist

Social Media Specialist locatie: Rotterdam (Zuid Holland) Wij zoeken op korte termijn een nieuwe collega, een social media specialist/ adviseur sociale media (24 uur), voor ons sprankelende team Communicatie van CJG Rijnmond. Onze focus ligt op het informeren en binden van onze in- en externe klanten en stakeholders en het versterken van onze naamsbekendheid en zichtbaarheid. Dat doen we in nauwe samenwerking met elkaar. Over de functie Ons team bestaat uit 7 communicatieprofessionals met ieder een eigen expertise. Als lid van het online team ben je verantwoordelijk voor het ontwikkelen, uitvoeren en analyseren van onze socialemediastrategie. Ook stel je campagnes

Bekijk vacature »

UX Writer (m/v/d)

UX Writer (m/v/d) Everything we do, starts with you. Together with you, we build the most human-centric fintech. We have the ambition to create the next. And - with Bertelsmann - a strong foundation to start from. Let’s make it new – for society and for yourself. Wij zijn op zoek naar een UX Writer (m/v/d) Fulltime - Op ons kantoor in Amsterdam of Heerenveen / deels vanuit huis Als UX Writer bij Riverty hou jij je bezig met onze strategie om daar te zijn waar onze gebruikers zijn en op de manier waarop zij ons nodig hebben, terwijl wij

Bekijk vacature »

Developer Full Stack

Functie omschrijving Full Stack Developer gezocht! Wij zijn op zoek naar een Full Stack Developer voor een bedrijf in de regio Nijkerk. Je maakt in deze functie onderdeel uit van een groeiend team met een goede ambitie waarbij eenheid, betrokken en overtreffen de belangrijkste kernwaardes zijn. Het bedrijf werkt volgens de AGILE/SCRUM methode, wat je o.a. terug vindt in de tweewekelijkse sprints, retrospectives en een daily standup. Je takenpakket bestaat uit: Bijdragen aan het door ontwikkelen, onderhouden en optimaliseren van een Saas applicatie; Bijdragen aan de innovatie van het bedrijf en hun klanten; Het ontwikkelen op de laatste technologie van

Bekijk vacature »

Robot Programmeur

In het kort Drie redenen waarom deze vacature uniek is! Programmeren van zelflerende robots Werken op kantoor en testen in de bedrijfshal Je krijgt verantwoordelijkheid, vrijheid en je mag werken naar eigen inzicht De organisatie Hier ga je aan de slag Een bedrijf dat innovatieve robottoepassingen ontwerpt en bouwt voor onder andere de staal industrie, energie- bouw- en agrarische sector. De robots die vaak in combinatie met diverse randapparatuur geleverd worden vormen een totaaloplossing voor de klant. Dit zijn klanten over de hele wereld, van België en Duitsland tot China, India, maar ook in Nederland. Projecten waar momenteel aan wordt

Bekijk vacature »

Software Programmeur PHP

Functie Wij zijn op zoek naar een PHP programmeur voor een leuke opdrachtgever in omgeving Alblasserdam. Heb jij altijd al willen werken bij een bedrijf dat veilige netwerkverbindingen levert door middel van veilige oplossingen? Lees dan snel verder. Hoe kan jouw dag er straks uitzien? Je gaat software en webapplicaties ontwikkelen met behulp van de talen C / C++ / PHP. Je gaat technische klussen uitvoeren op locatie bij klanten. Je onderhoudt contact met de projectleider om er zeker van te zijn dat een projecten goed verlopen. Je gaat klanten ondersteunen op het gebied van geleverde software en webapplicaties. Tevens

Bekijk vacature »

Back end developer

Functie Jij als full stack ontwikkelaar komt te werken in een team bestaande uit 4 back end programmeurs, 2 vormgevers/ Front end developers en een online marketeer. Qua persoonlijkheden is het team erg gevarieerd van sportfanaten tot gameliefhebbers en Golfers. Een ding heeft iedereen hier gemeen; Passie voor goede code. In jouw rol zul je voor 90% van je tijd je bezig houden met het ontwikkelen van grote maatwerk applicaties. Daarnaast hebben wij op aanvraag ook wel eens een website of onderhoudsklusje, die opgepakt moet worden en hier ben jij ook niet vies van. De technische uitdaging momenteel is dat

Bekijk vacature »

OutSystems developer

Dit ga je doen Klanten adviseren over de mogelijkheden van OutSystems; OutSystems oplossingen ontwikkelen en implementeren; Stakeholdermanagement; Kennis en expertise up to date houden en delen met het team. Hier ga je werken Onze opdrachtgever, gevestigd in regio Amsterdam, is een innovatieve dienstverlener die zich richt op grote corporates in verschillende sectoren. Doordat je bij veel verschillende klanten aan de slag zal gaan is geen enkel project hetzelfde. De organisatie kenmerkt zich door hoge mate van professionaliteit en innovatieve oplossingen. In de rol van OutSystems developer zal jij verschillende grote klanten helpen om efficiënte OutSystems oplossingen te ontwikkelen en implementeren.

Bekijk vacature »

SQL database developer

Functie omschrijving Voor een softwarebedrijf gespecialiseerd in het ontwikkelen van logistieke software in omgeving Tilburg zijn wij op zoek naar een ervaren SQL database developer. Je gaat werken aan uitdagende, complexe projecten. Iedere klant/project betekent maatwerk in de database. Jouw werkzaamheden zullen er als volgt uit zien: Je bent verantwoordelijk voor de gehele ontwikkelstraat. Van architectuur tot ontwikkeling Je gaat je bezig houden met het ontwerpen en ontwikkelen van MS SQL server databases. Je gebruikt hiervoor T-SQL als programmeer laag. Je begeleidt als lead developer de projecten bij klanten van A – Z. Je sluit aan bij meetings met klanten,

Bekijk vacature »

Full Stack Developer/ Applicatie Ontwikkelaar

Wat jij doet Als Applicatie Ontwikkelaar ben je onderdeel van het team die de Rimote omgeving ontwikkeld en onderhoud. Hierbij kan je denk aan de cloud, on premise en webapplicaties welke worden gebruikt in bijvoorbeeld industriële bakkerijen, biogasinstallaties en kwekerijen. Deze applicaties verzorgen (remote) de aansturing en monitoring van processen, machines en robots. Van a tot z ben je betrokken bij projecten. Dit betekent vanaf ontwerp tot oplevering. Je moet samen met jouw team een goed product neer zetten. Dit begint met het opzetten van het ontwerp. De basis van de software moet staan als een huis. Daarvoor moet jij

Bekijk vacature »

Front-end developer - working on software for arou

Functie They have recently started looking for an experienced Front-end (mobile/app) developer. Because of the short lines within the team, they are also looking for someone who can communicate with the service desk, sales and support for technical questions. You will join their IT team consisting of about 10 colleagues divided over two teams in rooms opposite each other. Half of these are involved in their front-end. You will work together with, among others, the Architect, 1 senior, 1 junior and there is a Team Leader. In terms of technology, they work with a unique tech-stack, particularly because of the

Bekijk vacature »
Arnold Dijkman

Arnold Dijkman

28/02/2019 11:45:42
Quote Anchor link
Hallo,

Ik zit met het volgende probleem:

Al jaren maak ik gebruik van een open source urenregistratiesysteem. Het werk vlekkeloos.
Nu komt de wens om negatieve uren te kunnen schrijven, en standaard ondersteunt de software dit niet (alleen positieve uren zijn toegestaan).
Graag zou ik dat met een aanpassing in de code willen realiseren.

Hieronder de code:

Code (php)
PHP script in nieuw venster Selecteer het PHP script
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
<?php


import('DateAndTime');

// The ttTimeHelper is a class to help with time-related values.
class ttTimeHelper {

  // isWeekend determines if $date falls on weekend.
  static function isWeekend($date) {
    $weekDay = date('w', strtotime($date));
    return ($weekDay == WEEKEND_START_DAY || $weekDay == (WEEKEND_START_DAY + 1) % 7);
  }


  // isHoliday determines if $date falls on a holiday.
  static function isHoliday($date) {
    global $user;
    global $i18n;

    if (!$user->show_holidays) return false;

    // $date is expected as string in DB_DATEFORMAT.
    $month = date('m', strtotime($date));
    $day = date('d', strtotime($date));
    if (in_array($month.'/'.$day, $i18n->holidays))
      return true;

    return false;
  }


  // isValidTime validates a value as a time string.
  static function isValidTime($value) {
    if (strlen($value)==0 || !isset($value)) return false;

    // 24 hour patterns.
    if ($value == '24:00' || $value == '2400') return true;

    if (preg_match('/^([0-1]{0,1}[0-9]|[2][0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
    }

    if (preg_match('/^([0-1]{0,1}[0-9]|[2][0-4])$/', $value )) { // 0 - 24
      return true;
    }


    // 12 hour patterns
    if (preg_match('/^[1-9]\s?(am|AM|pm|PM)$/', $value)) { // 1 - 9 am
      return true;
    }

    if (preg_match('/^(0[1-9]|1[0-2])\s?(am|AM|pm|PM)$/', $value)) { // 01 - 12 am
      return true;
    }

    if (preg_match('/^[1-9]:?[0-5][0-9]\s?(am|AM|pm|PM)$/', $value)) { // 1:00 - 9:59 am, 100 - 959 am
      return true;
    }

    if (preg_match('/^(0[1-9]|1[0-2]):?[0-5][0-9]\s?(am|AM|pm|PM)$/', $value)) { // 01:00 - 12:59 am, 0100 - 1259 am
      return true;
    }


    return false;
  }


  // isValidDuration validates a value as a time duration string (in hours and minutes).
  static function isValidDuration($value) {
    if (strlen($value) == 0 || !isset($value)) return false;

    if ($value == '24:00' || $value == '2400') return true;

    if (preg_match('/^([0-1]{0,1}[0-9]|2[0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
    }

    if (preg_match('/^([0-1]{0,1}[0-9]|2[0-4])h?$/', $value )) { // 0, 1 ... 24
      return true;
    }


    global $user;
    $localizedPattern = '/^([0-1]{0,1}[0-9]|2[0-3])?['.$user->decimal_mark.'][0-9]{1,4}h?$/';
    if (preg_match($localizedPattern, $value )) { // decimal values like 0.5, 1.25h, ... .. 23.9999h (or with comma)
      return true;
    }


    return false;
  }


  // postedDurationToMinutes - converts a value representing a duration
  // (usually enetered in a form by a user) to an integer number of minutes.
  //
  // Parameters:
  //   $duration - user entered duration string. Valid strings are:
  //               3 or 3h - means 3 hours. Note: h and m letters are not localized.
  //               0.25 or 0.25h or .25 or .25h - means a quarter of hour.
  //               0,25 or 0,25h or ,25 or ,25h - same as above for users with comma ad decimal mark.
  //               1:30 - means 1 hour 30 minutes.
  //               25m - means 25 minutes.
  //   $max - maximum number of minutes that is valid.
  //
  //   At the moment, we have 2 variations of duration types:
  //   1) A duration within a day, such as in a time entry.
  //   These are less or equal to 24*60 minutes.
  //
  //   2) A duration of a monthly quota, with max value of 31*24*60 minutes.
  //
  // This function is generic to be used for both types.
  //
  // Returns false if the value cannot be converted.

  static function postedDurationToMinutes($duration, $max = 1440) {
    // Handle empty value.
    if (!isset($duration) || strlen($duration) == 0)
      return null; // Value is not set. Caller decides whether it is valid or not.

    // Handle whole hours.

    if (preg_match('/^\d{1,3}h?$/', $duration )) { // 0 - 999, 0h - 999h
      $minutes = 60 * trim($duration, 'h');
      return $minutes > $max ? false : $minutes;
    }


    // Handle a normalized duration value.
    if (preg_match('/^\d{1,3}:[0-5][0-9]$/', $duration )) { // 0:00 - 999:59
      $time_array = explode(':', $duration);
      $minutes = (int)@$time_array[1] + ((int)@$time_array[0]) * 60;
      return $minutes > $max ? false : $minutes;
    }


    // Handle localized fractional hours.
    global $user;
    $localizedPattern = '/^(\d{1,3})?['.$user->getDecimalMark().'][0-9]{1,4}h?$/';
    if (preg_match($localizedPattern, $duration )) { // decimal values like .5, 1.25h, ... .. 999.9999h (or with comma)
        if ($user->getDecimalMark() == ',')
          $duration = str_replace (',', '.', $duration);

        $minutes = (int)round(60 * floatval($duration));
        return $minutes > $max ? false : $minutes;
    }


    // Handle minutes. Some users enter durations like 10m (meaning 10 minutes).
    if (preg_match('/^\d{1,5}m$/', $duration )) { // 0m - 99999m
      $minutes = (int) trim($duration, 'm');
      return $minutes > $max ? false : $minutes;
    }


    // Everything else is not a valid duration.
    return false;
  }


  // minutesToDuration converts an integer number of minutes into duration string.
  // Formats returned HH:MM, HHH:MM, HH, or HHH.

  static function minutesToDuration($minutes, $abbreviate = false) {
    if ($minutes < 0) return false;

    $hours = (string) (int)($minutes / 60);
    $mins = (string) round(fmod($minutes, 60));
    if (strlen($mins) == 1)
      $mins = '0' . $mins;
    if ($abbreviate && $mins == '00')
      return $hours;

    return $hours.':'.$mins;
  }


  // toMinutes - converts a time string in format 00:00 to a number of minutes.
  static function toMinutes($value) {
    $time_a = explode(':', $value);
    return (int)@$time_a[1] + ((int)@$time_a[0]) * 60;
  }


  // toAbsDuration - converts a number of minutes to format 0:00
  // even if $minutes is negative.

  static function toAbsDuration($minutes, $abbreviate = false){
    $hours = (string)((int)abs($minutes / 60));
    $mins = (string) round(abs(fmod($minutes, 60)));
    if (strlen($mins) == 1)
      $mins = '0' . $mins;
    if ($abbreviate && $mins == '00')
      return $hours;

    return $hours.':'.$mins;
  }


  // toDuration - calculates duration between start and finish times in 00:00 format.
  static function toDuration($start, $finish) {
    $duration_minutes = ttTimeHelper::toMinutes($finish) - ttTimeHelper::toMinutes($start);
    if ($duration_minutes <= 0) return false;

    return ttTimeHelper::toAbsDuration($duration_minutes);
  }


  // The to12HourFormat function converts a 24-hour time value (such as 15:23) to 12 hour format (03:23 PM).
  static function to12HourFormat($value) {
    if ('24:00' == $value) return '12:00 AM';

    $time_a = explode(':', $value);
    if ($time_a[0] > 12)
      $res = (string)((int)$time_a[0] - 12).':'.$time_a[1].' PM';
    elseif ($time_a[0] == 12)
      $res = $value.' PM';
    elseif ($time_a[0] == 0)
      $res = '12:'.$time_a[1].' AM';
    else
      $res = $value.' AM';
    return $res;
  }


  // The to24HourFormat function attempts to convert a string value (human readable notation of time of day)
  // to a 24-hour time format HH:MM.

  static function to24HourFormat($value) {
    $res = null;

    // Algorithm: use regular expressions to find a matching pattern, starting with most popular patterns first.
    $tmp_val = trim($value);

    // 24 hour patterns.
    if (preg_match('/^([01][0-9]|2[0-3]):[0-5][0-9]$/', $tmp_val)) { // 00:00 - 23:59
      // We already have a 24-hour format. Just return it.

      $res = $tmp_val;
      return $res;
    }

    if (preg_match('/^[0-9]:[0-5][0-9]$/', $tmp_val)) { // 0:00 - 9:59
      // This is a 24-hour format without a leading zero. Add 0 and return.

      $res = '0'.$tmp_val;
      return $res;
    }

    if (preg_match('/^[0-9]$/', $tmp_val)) { // 0 - 9
      // Single digit. Assuming hour number.

      $res = '0'.$tmp_val.':00';
      return $res;
    }

    if (preg_match('/^([01][0-9]|2[0-4])$/', $tmp_val)) { // 00 - 24
      // Two digit hour number.

      $res = $tmp_val.':00';
      return $res;
    }

    if (preg_match('/^[0-9][0-5][0-9]$/', $tmp_val)) { // 000 - 959
      // Missing colon. We'll assume the first digit is the hour, the rest is minutes.

      $tmp_arr = str_split($tmp_val);
      $res = '0'.$tmp_arr[0].':'.$tmp_arr[1].$tmp_arr[2];
      return $res;
    }

    if (preg_match('/^([01][0-9]|2[0-3])[0-5][0-9]$/', $tmp_val)) { // 0000 - 2359
      // Missing colon. We'll assume the first 2 digits are the hour, the rest is minutes.

      $tmp_arr = str_split($tmp_val);
      $res = $tmp_arr[0].$tmp_arr[1].':'.$tmp_arr[2].$tmp_arr[3];
      return $res;
    }

    // Special handling for midnight.
    if ($tmp_val == '24:00' || $tmp_val == '2400')
      return '24:00';

    // 12 hour AM patterns.
    if (preg_match('/.(am|AM)$/', $tmp_val)) {

      // The $value ends in am or AM. Strip it.
      $tmp_val = rtrim(substr($tmp_val, 0, -2));

      // Special case to handle 12, 12:MM, and 12MM AM.
      if (preg_match('/^12:?([0-5][0-9])?$/', $tmp_val))
        $tmp_val = '00'.substr($tmp_val, 2);

      // We are ready to convert AM time.
      if (preg_match('/^(0[0-9]|1[0-1]):[0-5][0-9]$/', $tmp_val)) { // 00:00 - 11:59
        // We already have a 24-hour format. Just return it.

        $res = $tmp_val;
        return $res;
      }

      if (preg_match('/^[1-9]:[0-5][0-9]$/', $tmp_val)) { // 1:00 - 9:59
        // This is a 24-hour format without a leading zero. Add 0 and return.

        $res = '0'.$tmp_val;
        return $res;
      }

      if (preg_match('/^[1-9]$/', $tmp_val)) { // 1 - 9
        // Single digit. Assuming hour number.

        $res = '0'.$tmp_val.':00';
        return $res;
      }

      if (preg_match('/^(0[0-9]|1[0-1])$/', $tmp_val)) { // 00 - 11
        // Two digit hour number.

        $res = $tmp_val.':00';
        return $res;
      }

      if (preg_match('/^[1-9][0-5][0-9]$/', $tmp_val)) { // 100 - 959
        // Missing colon. Assume the first digit is the hour, the rest is minutes.

        $tmp_arr = str_split($tmp_val);
        $res = '0'.$tmp_arr[0].':'.$tmp_arr[1].$tmp_arr[2];
        return $res;
      }

      if (preg_match('/^(0[0-9]|1[0-1])[0-5][0-9]$/', $tmp_val)) { // 0000 - 1159
        // Missing colon. We'll assume the first 2 digits are the hour, the rest is minutes.

        $tmp_arr = str_split($tmp_val);
        $res = $tmp_arr[0].$tmp_arr[1].':'.$tmp_arr[2].$tmp_arr[3];
        return $res;
      }
    }
// AM cases handling.

    // 12 hour PM patterns.

    if (preg_match('/.(pm|PM)$/', $tmp_val)) {

      // The $value ends in pm or PM. Strip it.
      $tmp_val = rtrim(substr($tmp_val, 0, -2));

      if (preg_match('/^[1-9]$/', $tmp_val)) { // 1 - 9
        // Single digit. Assuming hour number.

        $hour = (string)(12 + (int)$tmp_val);
        $res = $hour.':00';
        return $res;
      }

      if (preg_match('/^((0[1-9])|(1[0-2]))$/', $tmp_val)) { // 01 - 12
        // Double digit hour.

        if ('12' != $tmp_val)
          $tmp_val = (string)(12 + (int)$tmp_val);
        $res = $tmp_val.':00';
        return $res;
      }

      if (preg_match('/^[1-9][0-5][0-9]$/', $tmp_val)) { // 100 - 959
        // Missing colon. We'll assume the first digit is the hour, the rest is minutes.

        $tmp_arr = str_split($tmp_val);
        $hour = (string)(12 + (int)$tmp_arr[0]);
        $res = $hour.':'.$tmp_arr[1].$tmp_arr[2];
        return $res;
      }

      if (preg_match('/^(0[1-9]|1[0-2])[0-5][0-9]$/', $tmp_val)) { // 0100 - 1259
        // Missing colon. We'll assume the first 2 digits are the hour, the rest is minutes.

        $hour = substr($tmp_val, 0, -2);
        $min = substr($tmp_val, 2);
        if ('12' != $hour)
          $hour = (string)(12 + (int)$hour);
        $res = $hour.':'.$min;
        return $res;
      }

      if (preg_match('/^[1-9]:[0-5][0-9]$/', $tmp_val)) { // 1:00 - 9:59
        $hour = substr($tmp_val, 0, -3);
        $min = substr($tmp_val, 2);
        $hour = (string)(12 + (int)$hour);
        $res = $hour.':'.$min;
        return $res;
      }

      if (preg_match('/^(0[1-9]|1[0-2]):[0-5][0-9]$/', $tmp_val)) { // 01:00 - 12:59
        $hour = substr($tmp_val, 0, -3);
        $min = substr($tmp_val, 3);
        if ('12' != $hour)
          $hour = (string)(12 + (int)$hour);
        $res = $hour.':'.$min;
        return $res;
      }
    }
// PM cases handling.

    return $res;
  }


  // isValidInterval - checks if finish time is greater than start time.
  static function isValidInterval($start, $finish) {
    $start = ttTimeHelper::to24HourFormat($start);
    $finish = ttTimeHelper::to24HourFormat($finish);
    if ('00:00' == $finish) $finish = '24:00';

    $minutesStart = ttTimeHelper::toMinutes($start);
    $minutesFinish = ttTimeHelper::toMinutes($finish);
    if ($minutesFinish > $minutesStart)
      return true;

    return false;
  }


  // insert - inserts a time record into tt_log table. Does not deal with custom fields.
  static function insert($fields)
  {

    global $user;
    $mdb2 = getConnection();

    $user_id = (int) $fields['user_id'];
    $group_id = (int) $fields['group_id'];
    $org_id = (int) $fields['org_id'];
    $date = $fields['date'];
    $start = $fields['start'];
    $finish = $fields['finish'];
    $duration = $fields['duration'];
    if ($duration) {
      $minutes = ttTimeHelper::postedDurationToMinutes($duration);
      $duration = ttTimeHelper::minutesToDuration($minutes);
    }

    $client = $fields['client'];
    $project = $fields['project'];
    $task = $fields['task'];
    $invoice = $fields['invoice'];
    $note = $fields['note'];
    $billable = $fields['billable'];
    $paid = $fields['paid'];
    if (array_key_exists('status', $fields)) { // Key exists and may be NULL during migration of data.
      $status_f = ', status';
      $status_v = ', '.$mdb2->quote($fields['status']);
    }


    $start = ttTimeHelper::to24HourFormat($start);
    if ($finish) {
      $finish = ttTimeHelper::to24HourFormat($finish);
      if ('00:00' == $finish) $finish = '24:00';
    }


    $created_v = ', now(), '.$mdb2->quote($_SERVER['REMOTE_ADDR']).', '.$user->id;

    if (!$billable) $billable = 0;
    if (!$paid) $paid = 0;

    if ($duration) {
      $sql = "insert into tt_log (user_id, group_id, org_id, date, duration, client_id, project_id, task_id, invoice_id, comment, billable, paid, created, created_ip, created_by $status_f) ".
        "values ($user_id, $group_id, $org_id, ".$mdb2->quote($date).", '$duration', ".$mdb2->quote($client).", ".$mdb2->quote($project).", ".$mdb2->quote($task).", ".$mdb2->quote($invoice).", ".$mdb2->quote($note).", $billable, $paid $created_v $status_v)";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }
else {
      $duration = ttTimeHelper::toDuration($start, $finish);
      if ($duration === false) $duration = 0;
      if (!$duration && ttTimeHelper::getUncompleted($user_id)) return false;

      $sql = "insert into tt_log (user_id, group_id, org_id, date, start, duration, client_id, project_id, task_id, invoice_id, comment, billable, paid, created, created_ip, created_by $status_f) ".
        "values ($user_id, $group_id, $org_id, ".$mdb2->quote($date).", '$start', '$duration', ".$mdb2->quote($client).", ".$mdb2->quote($project).", ".$mdb2->quote($task).", ".$mdb2->quote($invoice).", ".$mdb2->quote($note).", $billable, $paid $created_v $status_v)";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }


    $id = $mdb2->lastInsertID('tt_log', 'id');
    return $id;
  }


  // update - updates a record in log table. Does not update its custom fields.
  static function update($fields)
  {

    global $user;
    $mdb2 = getConnection();

    $id = $fields['id'];
    $date = $fields['date'];
    $user_id = $fields['user_id'];
    $client = $fields['client'];
    $project = $fields['project'];
    $task = $fields['task'];
    $start = $fields['start'];
    $finish = $fields['finish'];
    $duration = $fields['duration'];
    if ($duration) {
      $minutes = ttTimeHelper::postedDurationToMinutes($duration);
      $duration = ttTimeHelper::minutesToDuration($minutes);
    }

    $note = $fields['note'];

    $billable_part = '';
    if ($user->isPluginEnabled('iv')) {
      $billable_part = $fields['billable'] ? ', billable = 1' : ', billable = 0';
    }

    $paid_part = '';
    if ($user->can('manage_invoices') && $user->isPluginEnabled('ps')) {
      $paid_part = $fields['paid'] ? ', paid = 1' : ', paid = 0';
    }

    $modified_part = ', modified = now(), modified_ip = '.$mdb2->quote($_SERVER['REMOTE_ADDR']).', modified_by = '.$user->id;

    $start = ttTimeHelper::to24HourFormat($start);
    $finish = ttTimeHelper::to24HourFormat($finish);
    if ('00:00' == $finish) $finish = '24:00';
    
    if ($start) $duration = '';

    if ($duration) {
      $sql = "UPDATE tt_log set start = NULL, duration = '$duration', client_id = ".$mdb2->quote($client).", project_id = ".$mdb2->quote($project).", task_id = ".$mdb2->quote($task).", ".
        "comment = ".$mdb2->quote($note)."$billable_part $paid_part $modified_part, date = '$date' WHERE id = $id";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }
else {
      $duration = ttTimeHelper::toDuration($start, $finish);
      if ($duration === false)
        $duration = 0;
      $uncompleted = ttTimeHelper::getUncompleted($user_id);
      if (!$duration && $uncompleted && ($uncompleted['id'] != $id))
        return false;

      $sql = "UPDATE tt_log SET start = '$start', duration = '$duration', client_id = ".$mdb2->quote($client).", project_id = ".$mdb2->quote($project).", task_id = ".$mdb2->quote($task).", ".
        "comment = ".$mdb2->quote($note)."$billable_part $paid_part $modified_part, date = '$date' WHERE id = $id";
      $affected = $mdb2->exec($sql);
      if (is_a($affected, 'PEAR_Error'))
        return false;
    }

    return true;
  }


  // delete - deletes a record from tt_log table and its associated custom field values.
  static function delete($id) {
    global $user;
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $sql = "update tt_log set status = null".
      " where id = $id and user_id = $user_id and group_id = $group_id and org_id = $org_id";
    $affected = $mdb2->exec($sql);
    if (is_a($affected, 'PEAR_Error'))
      return false;

    $sql = "update tt_custom_field_log set status = null".
      " where log_id = $id and group_id = $group_id and org_id = $org_id";
    $affected = $mdb2->exec($sql);
    if (is_a($affected, 'PEAR_Error'))
      return false;

    return true;
  }


  // getTimeForDay - gets total time for a user for a specific date.
  static function getTimeForDay($date) {
    global $user;
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $sql = "select sum(time_to_sec(duration)) as sm from tt_log".
      " where user_id = $user_id and group_id = $group_id and org_id = $org_id and date = '$date' and status = 1";
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      $val = $res->fetchRow();
      return sec_to_time_fmt_hm($val['sm']);
    }

    return false;
  }


  // getTimeForWeek - gets total time for a user for a given week.
  static function getTimeForWeek($date) {
    global $user;
    import('Period');
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $period = new Period(INTERVAL_THIS_WEEK, $date);
    $sql = "select sum(time_to_sec(duration)) as sm from tt_log".
      " where user_id = $user_id and group_id = $group_id and org_id = $org_id".
      " and date >= '".$period->getStartDate(DB_DATEFORMAT)."' and date <= '".$period->getEndDate(DB_DATEFORMAT)."' and status = 1";
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      $val = $res->fetchRow();
      return sec_to_time_fmt_hm($val['sm']);
    }

    return false;
  }


  // getTimeForMonth - gets total time for a user for a given month.
  static function getTimeForMonth($date) {
    global $user;
    import('Period');
    $mdb2 = getConnection();

    $user_id = $user->getUser();
    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $period = new Period(INTERVAL_THIS_MONTH, $date);
    $sql = "select sum(time_to_sec(duration)) as sm from tt_log".
      " where user_id = $user_id and group_id = $group_id and org_id = $org_id".
      " and date >= '".$period->getStartDate(DB_DATEFORMAT)."' and date <= '".$period->getEndDate(DB_DATEFORMAT)."' and status = 1";
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      $val = $res->fetchRow();
      return sec_to_time_fmt_hm($val['sm']);
    }

    return false;
  }


  // getUncompleted - retrieves an uncompleted record for user, if one exists.
  static function getUncompleted($user_id) {
    $mdb2 = getConnection();

    $sql = "select id, start from tt_log  
      where user_id = $user_id and start is not null and time_to_sec(duration) = 0 and status = 1"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      if (!$res->numRows()) {
        return false;
      }

      if ($val = $res->fetchRow()) {
        return $val;
      }
    }

    return false;
  }


  // overlaps - determines if a record overlaps with an already existing record.
  //
  // Parameters:
  //   $user_id - user id for whom to determine overlap
  //   $date - date
  //   $start - new record start time
  //   $finish - new record finish time, may be null
  //   $record_id - optional record id we may be editing, excluded from overlap set

  static function overlaps($user_id, $date, $start, $finish, $record_id = null) {
    // Do not bother checking if we allow overlaps.
    global $user;
    if ($user->allow_overlap) return false;

    $mdb2 = getConnection();

    $start = ttTimeHelper::to24HourFormat($start);
    if ($finish) {
      $finish = ttTimeHelper::to24HourFormat($finish);
      if ('00:00' == $finish) $finish = '24:00';
    }

    // Handle these 3 overlap situations:
    // - start time in existing record
    // - end time in existing record
    // - record fully encloses existing record

    $sql = "select id from tt_log  
      where user_id = $user_id and date = "
.$mdb2->quote($date)."
      and start is not null and duration is not null and status = 1 and (
      (cast("
.$mdb2->quote($start)." as time) >= start and cast(".$mdb2->quote($start)." as time) < addtime(start, duration))";
    if ($finish) {
      $sql .= " or (cast(".$mdb2->quote($finish)." as time) <= addtime(start, duration) and cast(".$mdb2->quote($finish)." as time) > start)
      or (cast("
.$mdb2->quote($start)." as time) < start and cast(".$mdb2->quote($finish)." as time) > addtime(start, duration))";
    }

    $sql .= ")";
    if ($record_id) {
      $sql .= " and id <> $record_id";
    }

    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      if (!$res->numRows()) {
        return false;
      }

      if ($val = $res->fetchRow()) {
        return $val;
      }
    }

    return false;
  }


  // getRecord - retrieves a time record identified by its id.
  static function getRecord($id, $user_id) {
    global $user;
    $sql_time_format = "'%k:%i'"; //  24 hour format.
    if ('%I:%M %p' == $user->time_format)
      $sql_time_format = "'%h:%i %p'"; // 12 hour format for MySQL TIME_FORMAT function.

    $mdb2 = getConnection();

    $sql = "select l.id as id, TIME_FORMAT(l.start, $sql_time_format) as start,
      TIME_FORMAT(sec_to_time(time_to_sec(l.start) + time_to_sec(l.duration)), $sql_time_format) as finish,
      TIME_FORMAT(l.duration, '%k:%i') as duration,
      p.name as project_name, t.name as task_name, l.comment, l.client_id, l.project_id, l.task_id, l.invoice_id, l.billable, l.paid, l.date
      from tt_log l
      left join tt_projects p on (p.id = l.project_id)
      left join tt_tasks t on (t.id = l.task_id)
      where l.id = $id and l.user_id = $user_id and l.status = 1"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      if (!$res->numRows()) {
        return false;
      }

      if ($val = $res->fetchRow()) {
        return $val;
      }
    }

    return false;
  }


  // getAllRecords - returns all time records for a certain user.
  static function getAllRecords($user_id) {
    $result = array();

    $mdb2 = getConnection();

    $sql = "select l.id, l.user_id, l.date, TIME_FORMAT(l.start, '%k:%i') as start,
      TIME_FORMAT(sec_to_time(time_to_sec(l.start) + time_to_sec(l.duration)), '%k:%i') as finish,
      TIME_FORMAT(l.duration, '%k:%i') as duration,
      l.client_id, l.project_id, l.task_id, l.invoice_id, l.comment, l.billable, l.paid, l.status
      from tt_log l where l.user_id = $user_id order by l.id"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      while ($val = $res->fetchRow()) {
        $result[] = $val;
      }
    }
else return false;

    return $result;
  }


  // getRecords - returns time records for a user for a given date.
  static function getRecords($user_id, $date) {
    global $user;
    $mdb2 = getConnection();

    $group_id = $user->getGroup();
    $org_id = $user->org_id;

    $sql_time_format = "'%k:%i'"; //  24 hour format.
    if ('%I:%M %p' == $user->getTimeFormat())
      $sql_time_format = "'%h:%i %p'"; // 12 hour format for MySQL TIME_FORMAT function.

    $client_field = null;
    if ($user->isPluginEnabled('cl'))
      $client_field = ", c.name as client";

    $left_joins = " left join tt_projects p on (l.project_id = p.id)".
      " left join tt_tasks t on (l.task_id = t.id)";
    if ($user->isPluginEnabled('cl'))
      $left_joins .= " left join tt_clients c on (l.client_id = c.id)";

    $result = array();
    $sql = "select l.id as id, TIME_FORMAT(l.start, $sql_time_format) as start,
      TIME_FORMAT(sec_to_time(time_to_sec(l.start) + time_to_sec(l.duration)), $sql_time_format) as finish,
      TIME_FORMAT(l.duration, '%k:%i') as duration, p.name as project, t.name as task, l.comment, l.billable, l.invoice_id $client_field
      from tt_log l
      $left_joins
      where l.date = '$date' and l.user_id = $user_id and l.group_id = $group_id and l.org_id = $org_id and l.status = 1
      order by l.start, l.id"
;
    $res = $mdb2->query($sql);
    if (!is_a($res, 'PEAR_Error')) {
      while ($val = $res->fetchRow()) {
        if($val['duration']=='0:00')
          $val['finish'] = '';
        $result[] = $val;
      }
    }
else return false;

    return $result;
  }


  // canAdd determines if we can add a record in case there is a limit.
  static function canAdd() {
    $mdb2 = getConnection();
    $sql = "select param_value from tt_site_config where param_name = 'exp_date'";
    $res = $mdb2->query($sql);
    $val = $res->fetchRow();
    if (!$val) return true; // No expiration date.

    if (strtotime($val['param_value']) > time())
      return true; // Expiration date exists but not reached.

    return false;
  }
}


?>


Zou iemand mij hiermee kunnen helpen?
 
PHP hulp

PHP hulp

25/04/2024 21:01:51
 
Adoptive Solution

Adoptive Solution

28/02/2019 12:57:15
Quote Anchor link
Voor de nieuwsgierigen onder ons, hier is de bron :

https://github.com/anuko/timetracker

Toevoeging op 28/02/2019 13:05:21:

Ik zie dat de vraag ook in het Anuko forum is gesteld :

https://www.anuko.com/forum/viewtopic.php?t=2009
 
Nick Vledder

Nick Vledder

28/02/2019 13:31:57
Quote Anchor link
PHP-Developer inhuren een optie?
 
Arnold Dijkman

Arnold Dijkman

28/02/2019 13:42:33
Quote Anchor link
Adoptive Solution op 28/02/2019 12:57:15:
Voor de nieuwsgierigen onder ons, hier is de bron :

https://github.com/anuko/timetracker

Toevoeging op 28/02/2019 13:05:21:

Ik zie dat de vraag ook in het Anuko forum is gesteld :

https://www.anuko.com/forum/viewtopic.php?t=2009


Klopt hoor, dat ben ik :)

En ik hoop dat iemand mij hier kan helpen ipv een PHP developer in te huren, wel zo leuk en leerzaam!
 
Adoptive Solution

Adoptive Solution

28/02/2019 14:15:49
Quote Anchor link
Edit:
Verwijzing naar persoonlijke gegevens en werkgever verwijderd.
Niet relevant voor dit topic.
Gewijzigd op 28/02/2019 15:52:32 door - Ariën -
 
Rob Doemaarwat

Rob Doemaarwat

28/02/2019 14:50:54
Quote Anchor link
-?
 
Arnold Dijkman

Arnold Dijkman

28/02/2019 14:54:00
Quote Anchor link
Rob Doemaarwat op 28/02/2019 14:50:54:
-?


Heb ik geprobeerd Rob, werkt niet.
Dit heb ik gedaan:
Code (php)
PHP script in nieuw venster Selecteer het PHP script
1
2
3
4
<?php
    if (preg_match('/^([0-1]{0,1}[0-9]|[2][0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
?>

gewijzigd in
Code (php)
PHP script in nieuw venster Selecteer het PHP script
1
2
3
4
<?php
    if (preg_match('/^-?([0-1]{0,1}[0-9]|[2][0-3]):?[0-5][0-9]$/', $value )) { // 0:00 - 23:59, 000 - 2359
      return true;
?>
 
Rob Doemaarwat

Rob Doemaarwat

28/02/2019 15:04:05
Quote Anchor link
Nou ja, dat an sich werkt wel ($value mag dan bijvoorbeeld "-8:00" zijn), maar blijkbaar gaat het dan ergens anders mis in die 740 regels code (een PHP of MySQL functie die niet met negatieve tijden overweg kan, misschien zijn de velden in je database unsigned, enz). En dan is het nog niet beperkt tot die 740 regels van hierboven, als ik zo in die GitHub repo kijk, dan is er nog wel "iets meer". Je zult eerst zelf je probleem moeten proberen in te perken zodat je de vraag iets beter kunt stellen dan enkel "doet het niet".
 
Thomas van den Heuvel

Thomas van den Heuvel

28/02/2019 16:27:03
Quote Anchor link
Inderdaad, je kunt wel ergens een regexp rechtbreien maar dat wil helemaal niet zeggen dat dan ineens negatieve urenregistratie werkt... Je weet simpelweg de impact van zo'n wijziging niet tenzij je door alle bijbehorende relevante code gaat.

Heb je al gekeken of er een workaround is (bijvoorbeeld uren onder een speciale post boeken) of er een fork met deze uitbreiding?

Wellicht ook handig is de realisatie dat jij waarschijnlijk niet de enige bent die dit issue heeft, oftewel, dit probleem is waarschijnlijk niet uniek.
 
Nick Vledder

Nick Vledder

01/03/2019 11:22:43
Quote Anchor link
Zelf even de moeite nemen het "probleem" achter de vraag te isoleren, zou prettig zijn. "Het werkt niet" en vervolgens flink wat regels op een forum dumpen is niet zo chique.

PS Wat bedoel je trouwens met de opmerking "wel zo leuk en leerzaam!". Leuk voor jou en leerzaam voor iemand anders? Dus je gunt iemand anders wel een leercurve terwijl je zelf toekijkt? Wat vriendelijk van je.
Gewijzigd op 01/03/2019 11:33:48 door Nick Vledder
 
Ozzie PHP

Ozzie PHP

01/03/2019 14:30:32
Quote Anchor link
@Nick

>> Leuk voor jou en leerzaam voor iemand anders?

Dat zegt ie niet hoor.
 
Nick Vledder

Nick Vledder

02/03/2019 19:19:03
Quote Anchor link
Nee, maar hij spreekt het ook niet tegen.
 



Overzicht Reageren

 
 

Om de gebruiksvriendelijkheid van onze website en diensten te optimaliseren maken wij gebruik van cookies. Deze cookies gebruiken wij voor functionaliteiten, analytische gegevens en marketing doeleinden. U vindt meer informatie in onze privacy statement.